Novel flexible parylene-based high-density electrode arrays have been developed for functional electrical stimulation in retinal and spinal cord applications. These electrode arrays are microfabricated according to single-metal-layer and, most recently, dual-metal-layer processes. A new heat-molding process has been implemented to conform electrode arrays to approximate the curvature of canine retinas, and chronic implantation studies have been undertaken to study the mechanical effects of parylene-based prostheses on the retina, with excellent results to date. Electrode arrays have also been implanted and tested on the spinal cords of murine models, with the ultimate goal of facilitation of locomotion after spinal cord injury; these arrays provide a higher density and better spatial control of stimulation and recording than is typically possible using traditional fine-wire electrodes. Spinal cord stimulation typically elicited three muscle responses, an early (direct), a middle (monosynaptic), and a late (polysynaptic) response, classified based on latency after stimulation. Stimulation at different rostrocaudal levels of the cord yielded markedly different muscle responses, highlighting the need for such high-density arrays.

OCTA generates high-resolution angiograms that illustrate many of the clinically relevant findings in diabetic retinopathy and offers a novel complement or alternative to fluorescein angiography. Although currently an investigational technique, OCTA in combination with standard OCT imaging is at least as good as fluorescein angiography in the evaluation of the macular complications of diabetic retinopathy.

High-frequency needle ultrasound transducers with an aperture size of 0.4 mm were fabricated using lead magnesium niobate-lead titanate (PMN-33%PT) as the active piezoelectric material. The active element was bonded to a conductive silver particle matching layer and a conductive epoxy backing through direct contact curing. An outer matching layer of parylene was formed by vapor deposition. The active element was housed within a polyimide tube and a 20-gauge needle housing. The magnitude and phase of the electrical impedance of the transducer were 47 Ω and ;38 , respectively. The measured center frequency and ;6 dB fractional bandwidth of the PMN-PT needle transducer were 44 MHz and 45%, respectively. The two-way insertion loss was approximately 15 dB. In vivo high-frequency, pulsed-wave Doppler patterns of blood flow in the posterior portion and in vitro ultrasonic backscatter microscope (UBM) images of the rabbit eye were obtained with the 44-MHz needle transducer.

PurposeTo quantitatively evaluate the retinal microvasculature in human subjects with retinal venous occlusions (RVO) using optical coherence tomography angiography (OCTA).DesignRetrospective, cross-sectional, observational case series.ParticipantsSixty subjects (84 eyes) were included (20 BRVO, 14 CRVO, 24 unaffected fellow eyes, and 26 controls).MethodsOCTA was performed on a prototype, spectral domain-OCTA system in the 3x3mm central macular region. Custom software was used to quantify morphology and density of retinal capillaries using four quantitative parameters. The vasculature of the segmented retinal layers and nonsegmented whole retina were analyzed.Main outcome measuresFractal dimension (FD), vessel density (VD), skeletal density (SD), and vessel diameter index (VDI) within the segmented retinal layers and nonsegmented whole retina vasculature.ResultsNonsegmented analysis of RVO eyes demonstrated significantly lower FD (1.64±0.01 vs 1.715±0.002; p<0.001), VD (0.32±0.01 vs 0.432±0.002; p<0.001), and SD (0.073±0.004 vs 0.099±0.001; p<0.001) compared to controls. Compared to the fellow eye, FD, VD and SD were lower (p<0.001), and VDI was higher (p<0.001). FD, VD, and SD progressively decreased as the extent (or type) of RVO increased (control vs BRVO vs CRVO; p<0.001). In the unaffected fellow eye FD, VD and SD showed significant differences when compared to control eyes or affected RVO eyes (p<0.001).ConclusionsQuantitative OCTA of the central 3x3mm macular region demonstrates significant differences in capillary density and morphology among subjects with BRVO and CRVO compared to controls or unaffected fellow eyes in all vascular layers. The unaffected fellow eyes also demonstrate significant differences when compared to controls. OCTA allows for noninvasive, layer-specific, quantitative evaluation of RVO-associated microvascular changes.