Assembly of 3D micro/nanostructures in advanced functional materials has important implications across broad areas of technology. Existing approaches are compatible, however, only with narrow classes of materials and/or 3D geometries. This paper introduces ideas for a form of Kirigami that allows precise, mechanically driven assembly of 3D mesostructures of diverse materials from 2D micro/nanomembranes with strategically designed geometries and patterns of cuts. Theoretical and experimental studies demonstrate applicability of the methods across length scales from macro to nano, in materials ranging from monocrystalline silicon to plastic, with levels of topographical complexity that significantly exceed those that can be achieved using other approaches. A broad set of examples includes 3D silicon mesostructures and hybrid nanomembrane-nanoribbon systems, including heterogeneous combinations with polymers and metals, with critical dimensions that range from 100 nm to 30 mm. A 3D mechanically tunable optical transmission window provides an application example of this Kirigami process, enabled by theoretically guided design.Kirigami | three-dimensional assembly | buckling | membranes T hree-dimensional micro/nanostructures are of growing interest (1-10), motivated by their increasingly widespread applications in biomedical devices (11-13), energy storage systems (14-19), photonics and optoelectronics (20-24), microelectromechanical systems (MEMS) (25-27), metamaterials (21,(28)(29)(30)(31)(32), and electronics (33-35). Of the many methods for fabricating such structures, few are compatible with the highest-performance classes of electronic materials, such as monocrystalline inorganic semiconductors, and only a subset of these can operate at high speeds, across length scales, from centimeters to nanometers. For example, although approaches (36-39) that rely on self-actuating materials for programmable shape changes provide access to a wide range of 3D geometries, they apply only to certain types of materials [e.g., gels (36, 37), liquid crystal elastomers (39), and shape memory alloys (38)], generally not directly relevant to high-quality electronics, optoelectronics, or photonics. Techniques that exploit bending/folding of thin plates via the action of residual stresses or capillary effects are, by contrast, naturally compatible with these modern planar technologies, but they are currently most well developed only for certain classes of hollow polyhedral or cylindrical geometries (1, 10, 40-44). Other approaches (45, 46) rely on compressive buckling in narrow ribbons (i.e., structures with lateral aspect ratios of >5:1) or filaments to yield complex 3D structures, but of primary utility in opennetwork mesh type layouts. Attempts to apply this type of scheme to sheets/membranes (i.e., structures with lateral aspect ratios of <5:1) lead to "kink-induced" stress concentrations that cause mechanical fracture. The concepts of Kirigami, an ancient aesthetic pursuit, involve strategically configured arrays of cuts to gui...

Materials with an ultralow density and ultrahigh electromagnetic-interference (EMI)-shielding performance are highly desirable in fields of aerospace, portable electronics, and so on. Theoretical work predicts that 3D carbon nanotube (CNT)/graphene hybrids are one of the most promising lightweight EMI shielding materials, owing to their unique nanostructures and extraordinary electronic properties. Herein, for the first time, a lightweight, flexible, and conductive CNT-multilayered graphene edge plane (MLGEP) core-shell hybrid foam is fabricated using chemical vapor deposition. MLGEPs are seamlessly grown on the CNTs, and the hybrid foam exhibits excellent EMI shielding effectiveness which exceeds 38.4 or 47.5 dB in X-band at 1.6 mm, while the density is merely 0.0058 or 0.0089 g cm , respectively, which far surpasses the best values of reported carbon-based composite materials. The grafted MLGEPs on CNTs can obviously enhance the penetration losses of microwaves in foams, leading to a greatly improved EMI shielding performance. In addition, the CNT-MLGEP hybrids also exhibit a great potential as nano-reinforcements for fabricating high-strength polymer-based composites. The results provide an alternative approach to fully explore the potentials of CNT and graphene, for developing advanced multifunctional materials.

High‐performance graphene microwave absorption materials are highly desirable in daily life and some extreme situations. A simple technique for the direct growth of graphene as absorption fillers in wave‐transmitting matrices is of paramount importance to bring it to real‐world application. Herein, a simple chemical vapor deposition (CVD) route for the direct growth of edge‐rich graphene (ERG) with tailored structures and tunable dielectric properties in porous Si3N4 ceramics using only methyl alcohol (CH3OH) as precursor is reported. The large O/C atomic ratio of CH3OH helps to build a mild oxidizing atmosphere and leads to a unique structure featuring open graphite nanosteps and freestanding nanoplanes, endowing the ERG/Si3N4 hybrid with an appropriate balance between good impedance matching and strong loss capacity. Accordingly, the prepared materials exhibit superior electromagnetic wave absorption, far surpassing that of traditional CVD graphene and reduced graphene oxide‐based materials, achieving an effective absorption bandwidth of 4.2 GHz covering the entire X band, with a thickness of 3.75 mm and a negligibly low loading content of absorbents. The results provide new insights for developing novel microwave absorption materials with strong reflection loss and wide absorption frequency range.

Searching for advanced microwave absorption (MA) nanomaterials is one of the most feasible ways to address the increasing electromagnetic pollution in both military and civil fields. To this end, graphene and MXene have won the widespread attention as the main representatives due to their remarkable structures and properties. The common features such as the large aspect ratio, active chemical surface, and varieties of synthesis processes endow graphene and MXene with unique superiorities for developing high‐efficiency MA structures, in particular lightweight assemblies and various hybrids. Meanwhile, the structural and performance differences (such as different conductivities) between them result in distinctive techniques in the design, fabrication, and application of their MA materials. Herein, the research progress in graphene‐ and MXene‐based MA materials is reviewed, with a special focus on advances in general strategies. Moreover, through the comparison between graphene‐ and MXene‐based MA materials, their respective advantages in achieving high‐performance MA are presented. Furthermore, the future challenge, research orientation, and prospect for these MA materials are also highlighted and discussed.

Because of its ultrahigh specific capacity, lithium metal holds great promise for revolutionizing current rechargeable battery technologies. Nevertheless, the unavoidable formation of dendritic Li, as well as the resulting safety hazards and poor cycling stability, have significantly hindered its practical applications. A mainstream strategy to solve this problem is introducing porous media, such as solid electrolytes, modified separators, or artificial protection layers, to block Li dendrite penetration. However, the scientific foundation of this strategy has not yet been elucidated. Herein, using experiments and simulation we analyze the role of the porous media in suppressing dendritic Li growth and probe the underlying fundamental mechanisms. It is found that the tortuous pores of the porous media, which drastically reduce the local flux of Li moving toward the anode and effectively extend the physical path of dendrite growth, are the key to achieving the nondendritic Li growth. On the basis of the theoretical exploration, we synthesize a novel porous silicon nitride submicron-wire membrane and incorporate it in both half-cell and full-cell configurations. The operation time of the battery cells is significantly extended without a short circuit. The findings lay the foundation to use a porous medium for achieving nondendritic Li growth in Li metal-based batteries.