No abstract

No abstract

No abstract

This work presents experiments about the transmission of electrons with an energy of around 15 keV with beam currents up to 20 µA through macroscopic glass capillaries. A systematic study was conducted to experimentally investigate the transmission of electrons through borosilicate glass capillaries with curve angles of 90°, 180°, 270° and 360° for the first time. The focus of the work was to identify the conditions under which the injected electron current is transmitted through the capillary. It was also shown that the transmission process in the macroscopic capillaries can be optically observed by cathodoluminescence—the interaction of electrons with the capillary surface causes locally a blue glow. Different distinctive “glow states” were observed and are found to correlate with different states of electron transmission.

A cubic Bézier-profile plate for multimodal vibration energy harvesting was developed. The design of the plate was based on an optimization procedure in which the profile of the plate was optimized via the parameters of a cubic Bézier curve to meet the requirements. The multimodal energy harvesting of the plate exploited its first bending mode and its first twisting mode. The conversion of vibration energy into electrical energy was by electromagnetic induction with a magnet attached to a corner of the plate. These two closely spaced vibration modes achieved the multi-modal energy harvesting of the device. Prototypes of the device were manufactured using a numerical-control machining process. The experimental results were in good agreement with the design specifications. With the same base lengths, height, and thickness, the maximum von Mises stress of the proposed plate was much lower due to its bell-shaped profile. The cubic Bézier curve chosen for the plate profile was effective for design of the closely-spaced multimodal vibration energy harvester. With the flexibility of its controllable parametric curve, a high design freedom of the energy harvester with specified frequency ratios could be achieved.