Peat fires are a global-scale source of carbon emissions and a leading cause of regional air quality deterioration, especially in Southeast Asia. The ignition and spread of peat fires are strongly affected by moisture, which acts as an energy sink. However, moisture effects on peat fire emissions are poorly understood in the literature. Here we present the first experimental work to investigate transient gas and particle emissions for a wide range of peat moisture contents (MCs). We include drying, ignition, smouldering spread, and even flaming stages. Peat samples conditioned to different MCs were burnt in the laboratory where a suite of diagnostics simultaneously measured mass loss rate, temperature profiles, real-time concentration of 20 gas species, and size-fractioned particle mass. It was found that MC affects emissions, in addition to peat burning dynamics. An increase in MC below a smouldering threshold of 160% in dry basis leads to a decrease in NH3 and greenhouse gas emissions, including CO2 and CH4.The burning of wet peat emits more coarse particles (between 1 to 10 m) than dry peat, especially during the ignition stage. In contrast, flaming stage emits mostly soot particles less than 1 m, and released 100% more fully oxidised gas species including CO2, NO2 and SO2 than smouldering. The examination of the resulting modified combustion efficiency (MCE) reveals that it fails to recognise with sufficient accuracy for smouldering combustion, especially for wet peat with MC >120%. MCE confuses drying and flaming, and has significant variations during the ignition stage. As a result, MCE 2 is not valid as a universal fire mode indicator used in the field. This work fills the gap knowledge between moisture and emissions, and provides a better understanding which can help mitigate peat fires.
WL (2018) Determining fractal properties of soot aggregates and primary particle size distribution in counterflow flames up to 10atm. Proceedings of the Combustion Institute.
The effects of dimethyl ether (DME) addition to ethylene fuel on sooting tendencies with varying pressure were investigated in counterflow diffusion flames by using a laser scattering technique. Sooting limit maps were determined in the fuel (XF) and oxygen (XO) mole fraction plane, separating sooting and non-sooting regions. The results showed that when DME is mixed to ethylene, the sooting region was appreciably shrank, especially in the cases of soot formation/oxidation (SFO) flames as compared with the cases of soot formation (SF) flames. This indicated an inhibiting role of DME on sooting. An interesting observation was that the critical XO required for sooting initially decreased and then increased with the DME mixing ratio to ethylene β for the cases of SF flames, exhibiting a non-monotonic behavior. This implied a promoting role of DME on sooting when small amount of DME is mixed to ethylene. As the pressure increased, the sooting region generally expanded. Specifically, the range of β in promoting soot formation extended with pressure. This implies that a strategy in reducing soot by adding DME to ethylene at high pressures required a large amount of DME addition. To interpret the observed phenomena, kinetic simulations including reaction pathway and sensitivity analyses were conducted with the opposed-flow flames model using the KAUST-Aramco PAH Mech. The results showed that the thermal effect of DME addition on sooting tendency monotonically decreases with . The chemical effect was found to be the main contributor to the DME addition effect on sooting tendency, resulting in the non-monotonic sooting limt behavior. The pathway analysis showed the role of methyl radicals generated from DME promoted incipient benzene ring formtion when small amount of DME was added, which can be attributed to the soot promoting role of DME addition for small β.
The application of water, or water mixed with suppressants, to combat wildfires is one of the most common firefighting methods but is rarely studied for smouldering peat wildfire, which is the largest type of fire worldwide in term of fuel consumption. We performed experiments by spraying suppressant to the top of a burning peat sample inside a reactor. A plant-based wetting agent suppressant was mixed with water at three concentrations: 0% (pure water), 1% (low concentration), and 5% (high concentration), and delivered with varying flowrates. The results showed that suppression time decreased non-linearly with flow rate. The average suppression time for the low-concentration solution was 39% lower than with just water, while the high-concentration solution reduced suppression time by 26%. The volume of fluid that contributes to the suppression of peat in our experiments is fairly constant at 5.7 AE 2.1 L kg À1 peat despite changes in flow rate and suppressant concentration. This constant volume suggests that suppression time is the duration needed to flood the peat layer and that the suppressant acts thermally and not chemically. The results provide a better understanding of the suppression mechanism of peat fires and can improve firefighting and mitigation strategies.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.