The behavior of a partially saturated soil during surface-water infiltration is analyzed by means of an elasto-plastic constitutive model formulated in terms of effective stress and extended to unsaturated conditions. The model is calibrated considering laboratory-scale experimental results under suction-controlled conditions. The wetting process in two collapsing soils, initially loaded at in situ stresses, is simulated by imposing two different boundary conditions: surface ponding and water flow. The stress paths resulting from the imbibition process are analyzed at different points inside the laye

The paper presents a new single-surface elasto-plastic model for unsaturated cemented soils, formulated within the critical state soil mechanics framework, which should be considered as an extension to unsaturated conditions of a recently proposed constitutive law for saturated structured soils. The model has been developed with the main purpose of inspecting the mechanical instabilities induced in natural soils by bond degradation resulting from the accumulation of plastic strains and/or the changes in pore saturation. At this scope, the constitutive equations are used to simulate typical geotechnical testing conditions, whose results are then analysed in light of the controllability theory. The results of triaxial tests on an ideal fully saturated cemented soil and on the corresponding unsaturated uncemented one are first discussed, aiming at detecting the evidence of potentially unstable conditions throughout the numerical simulations. This is followed by similar analyses considering the combined effects of both the above features. For each analysed case, a simple analytical stability criterion is proposed and validated against the numerical results, generalizing the results, and highlighting the crucial role of state variables and model parameters on the possible occurrence of failure conditions.

The paper presents a comprehensive analysis of the hydromechanical response of an embankment subject to inundation. The modified Cam clay model extended to unsaturated conditions and formulated in terms of Bishopâ\u80\u99s effective stress is used to predict the mechanical behavior of the sandâ\u80\u93clay mixture. The modelâ\u80\u99s ability to accurately reproduce the embankment response is evaluated by comparing the numerical predictions with the results of the physical model. Time evolution and spatial distribution of the wetting-induced displacements are analyzed together with the stress paths resulting from the imbibition process. The influence of after-compaction conditions on the embankment performance is examined focusing on the occurrence of the volumetric collapse

Summary This paper concerns the hydromechanical stability of partially saturated soils during wetting. The response of a loose silty sand is numerically/theoretically investigated with the main aim of identifying both triggering mechanisms and predisposing factors to instability. This latter is testified by both a rapid increase in the pore water pressure and an unexpected loss of numerical convergence. The study has been conducted at different scales from laboratory tests to boundary value problems, and in both cases, the controllability theory has been employed to both interpret and justify the numerical results.

In this paper we study an imbibition test problem defined over a real two-dimensional soil domain subject to in-situ stresses and oedometric boundary conditions. Two different kinds of materials are tested, which are characterized by different pore-structures and hydro-mechanical properties. The aim is that of clarifying the behavior of real materials under real loading conditionss. The stress paths associated to rainfall infiltration processes are simulated by using the commercial code ABAQUS, endowed with an own-made subroutine developed in order to incorporate the effects of partial saturation into the tangent stiffness.