No abstract

Flashover accidents on high-voltage bushings frequently occur under extreme rainfall, which is generally attributed to the bridging of adjacent sheds by pendant drops, a result of the dynamic deformation of pendant drops. We numerically investigate the effects of the parameters of pendant drops and the electric field on the dynamic deformation of pendant drops on a 500 kV transformer bushing under extreme rainfall and verify the simulation results by artificial rain experiment. The dynamic deformation of pendant drops is described by solving the Navier-Stokes equations and using the level set method. The results show that the maximum length of the pendant drop increases with the increase in the initial diameter and the initial mass flow rate, respectively, but decreases under the electric field. The main influencing factor on the maximum length of the pendant drop alters with the variation of the initial diameter and the initial mass flow rate in the absence of the electric field, whereas the initial mass flow rate is the unique main influencing factor in the presence of the electric field. Furthermore, the variations of the maximum length and breakup time of the pendant drop are elucidated by the instability of the pendant drop.

No abstract

The local heating phenomenon of composite insulator has drawn more and more attention gradually. From our analysis, the temperature rise of composite insulator is closely related to the moisture in atmospheric environment according to research results. Effect of moisture on the temperature rise of composite insulators is studied in this paper. The composite insulators, which have operated in power system for a long time and have been detected for local heating, and new insulator are taken as test samples. The temperature rise of operated composite insulators, which have been detected for local heating, increases with the rise of the relative humidity, while new insulator shows no temperature rise can be detected. The temperature rise of sample is not relevant to the core and the interface between core and housing material practically, but the high voltage end housing. The moisture content of the housing material is different at various relative humidity, and this leads to difference in dielectric loss, which is a significant source of local heating phenomenon. The difference of dielectric loss at different relative humidity leads to the temperature rise variation with the relative humidity.

No abstract