Roadway floor rock burst is an important manifestation of rock bursts in deeply buried mines. With the increase of mining depth and mining intensity, rock burst disasters in the roadway floor such as floor heaves are becoming more serious. The article investigated the roadway floor severe heave caused by floor rock burst during excavation of the No. 3401 working face, which was controlled by an anticlinal structure and deep mining in Shandong Mine, China. Firstly, by analyzing geological conditions of the working face, roadway support parameters, and characteristics of coal and rock, it was revealed that high tectonic stress and high crustal stress were main causes of the floor rock burst. Secondly, based on the Theory of Mechanics and Theory of Energy, the energy conversion process in the roadway floor was discussed, and the rock burst condition caused by elastic energy in the roadway floor was analyzed. The failure characteristics of roadway-surrounding rock were also inspected, using a borehole recorder. The roof and sidewalls of roadway mainly contained fissures and cracks, whereas cracks and broken areas are distributed in the roadway floor. Finally, based on the deformation and failure characteristics of roadway-surrounding rock, a method termed “overbreaking-bolting and grouting-backfill” was proposed to control roadway floor rock burst. The method was tested in the field, and the results showed that it could effectively control the deformation of roadway floor and rock burst, guaranteeing the stability of roadway floor. This impact control method for the roadway floor can provide a reference for the prevention and control of roadway rock burst in mines with similar geological conditions.
In blasting operation, some undesirable impacts, such as fly-rock, fragmentation, and back break, are induced. If the blasting design is not optimized, these mentioned impacts would reduce the blasting efficiency. To improve and optimize the blast design, blasting effect evaluation is essential. Due to the complexity of interactions among blasting parameters, empirical methods may not be appropriate for blast design optimization. A two-level mathematical model based on fuzzy mathematics, is proposed in this work. In total, 11 typical parameters were chosen and classified into three groups. The blasting effect is evaluated from three aspects, and then the comprehensive evaluation is given. A blasting effect evaluation system was developed based on the mentioned method on the platform of VC++. Some other techniques, such as image processing, were integrated into the system, which allowed for obtaining all of the parameters rapidly and conveniently. The system was applied in practical bench blast engineering. The results obtained from the system can provide effective information for the optimization of the next blast design.
Reinforced concrete (RC) slab is an important component in civil construction and protection engineering, and its dynamic response under impact loading is a complex mechanical problem, especially for two or multiple continuous impact loads. In this paper, a series of drop hammer impact tests were carried out to investigate the dynamic response of RC slabs with two successive impacts. The time history of impact force and the failure characteristic of the slab surface were recorded. Moreover, four influence factors, including slab thickness, reinforcement ratio, impact location, and drop hammer height have been discussed. Besides, a 3D numerical model based on the finite element method (FEM) was established to expand the research of constrained force, deflection, and vertical stress of an RC slab. The results show that increasing the slab thickness and reinforcement ratio can improve the impact resistance of an RC slab. The impact point location and drop hammer height have a great influence on the dynamic response of the RC slab. In addition, the RC slab will have more obvious damage under the second impact, but the dynamic response becomes weaker. It may be because of the local damage in the concrete caused by the first impact that would weaken the propagation of vibration.
The normal contact force determines the behavior of a particle system. To investigate the normal contact force in a one‐dimensional sphere chain subjected to impact load, by comparing the simulation results of the existing typical normal contact force models embedded in the discrete element program, an improved normal contact force model was proposed in this paper. The improved model consists of two parts: the Cundall model for loading and the Daniel model for unloading. Moreover, a systematic test was designed to verify the accuracy and applicability of the improved model. The results showed that the calculated contact force curves agree well with the experimental results. Furthermore, the improved model is implemented in the solution algorithm without need for complex numerical methods and parameters fitting, leading to more efficient simulations.
The mechanical behaviors of granular materials have high complexity. Since the mechanical behaviors of granular materials are difficult to describe theoretically, in this paper, the flow and fracture characteristics of granular materials were discussed by the experimental method. An experimental method was firstly proposed to identify the mechanical behaviors of granular materials under extra loading. An experimental device, which can be used to monitor force and displacement between particles, was invented. The uniaxial compression experiments of granular particles with different materials and grades were carried out, and the overall and local force between particles was obtained and investigated. Due to the flow of particles, the overall force rises in a fluctuating manner and the local force is not distributed evenly. Then, the particle fragments were sieved layer by layer. It was confirmed that the particles and loading strength have great influences on fractures of granular materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.