Silicon has attracted ever‐increasing attention as a high‐capacity anode material in Li‐ion batteries owing to its extremely high theoretical capacity. However, practical application of silicon anodes is seriously hindered by its fast capacity fading as a result of huge volume changes during the charge/discharge process. Here, an interpenetrated gel polymer binder for high‐performance silicon anodes is created through in‐situ crosslinking of water‐soluble poly(acrylic acid) (PAA) and polyvinyl alcohol (PVA) precursors. This gel polymer binder with deformable polymer network and strong adhesion on silicon particles can effectively accommodate the large volume change of silicon anodes upon lithiation/delithiation, leading to an excellent cycling stability and high Coulombic efficiency even at high current densities. Moreover, high areal capacity of ∼4.3 mAh/cm2 is achieved based on the silicon anode using the gel PAA–PVA polymer binder with a high mass loading. In view of simplicity in using the water soluble gel polymer binder, it is believed that this novel binder has a great potential to be used for high capacity silicon anodes in next generation Li‐ion batteries, as well as for other electrode materials with large volume change during cycling.

Room temperature sodium-ion batteries are of great interest for high-energy-density energy storage systems because of low-cost and natural abundance of sodium. Here, we report a novel phosphorus/graphene nanosheet hybrid as a high performance anode for sodium-ion batteries through facile ball milling of red phosphorus and graphene stacks. The graphene stacks are mechanically exfoliated to nanosheets that chemically bond with the surfaces of phosphorus particles. This chemical bonding can facilitate robust and intimate contact between phosphorus and graphene nanosheets, and the graphene at the particle surfaces can help maintain electrical contact and stabilize the solid electrolyte interphase upon the large volume change of phosphorus during cycling. As a result, the phosphorus/graphene nanosheet hybrid nanostructured anode delivers a high reversible capacity of 2077 mAh/g with excellent cycling stability (1700 mAh/g after 60 cycles) and high Coulombic efficiency (>98%). This simple synthesis approach and unique nanostructure can potentially be applied to other phosphorus-based alloy anode materials for sodium-ion batteries.

In spite of recent progress, there is still a lack of reliable organic electrodes for Li storage with high comprehensive performance, especially in terms of long-term cycling stability. Herein, we report an ideal polymer electrode based on anthraquinone, namely, polyanthraquinone (PAQ), or specifically, poly(1,4-anthraquinone) (P14AQ) and poly(1,5-anthraquinone) (P15AQ). As a lithium-storage cathode, P14AQ showed exceptional performance, including reversible capacity almost equal to the theoretical value (260 mA h g(-1); >257 mA h g(-1) for AQ), a very small voltage gap between the charge and discharge curves (2.18-2.14=0.04 V), stable cycling performance (99.4% capacity retention after 1000 cycles), and fast-discharge/charge ability (release of 69% of the low-rate capacity or 64% of the energy in just 2 min). Exploration of the structure-performance relationship between P14AQ and related materials also provided us with deeper understanding for the design of organic electrodes.

A red phosphorus‐graphene nanosheet hybrid is reported as an anode material for lithium‐ion batteries. Graphene nanosheets form a sea‐like, highly electronically conductive matrix, where the island‐like phosphorus particles are dispersed. Benefiting from this structure and properties of phosphorus, the hybrid delivers high initial capacity and exhibits promising retention at 60 °C.

Lithium-sulfur batteries suffer from severe self-discharge because of polysulfide dissolution and side reaction. In this work, a novel electrolyte containing bis(2,2,2-trifluoroethyl) ether (BTFE) was used to mitigate self-discharge of Li-S cells having both low- and high-sulfur-loading sulfur cathodes. This electrolyte meaningfully decreased self-discharge at elevated temperature, though differences in behavior of cells with high- and low-sulfur-loading were also noted. Further investigation showed that this effect likely stems from the formation of a more robust protective film on the anode surface.