The silver-activated zinc sulfide, ZnS(Ag), sensor to detect alpha-particles is normally fabricated by means of heat-melting or epoxy mixing spread. However, the fabrication process is very complicated so that it creates high costs and requires special high-tech equipment to manufacture the detector. For this reason, we have developed a new fabrication method which has the advantages of process simplicity and also high efficiency. The alpha particle response of the detector manufactured by the new spreading method was evaluated at varied thicknesses of ZnS(Ag) and the detection efficiency was better than for other methods like liquid brush method with an Am-241 alpha radiation source. Compared to conventional ZnS(Ag) detectors, the new detector shows a good detection efficiency, and its simple and low cost design makes it an economical and commercial alternative to more expensive alpha survey instruments.
Tenreiro, C (Tenreiro, Claudio). Univ Talca, Talca, Chile.The Korea Rare Isotope Accelerator, currently referred to as KoRIA, is briefly presented. The KoRIA facility is aimed to enable cutting-edge sciences in a wide range of fields. It consists of a 70 kW isotope separator on-line (ISOL) facility driven by a 70 MeV, 1 mA proton cyclotron and a 400 kW in-flight fragmentation (IFF) facility. The ISOL facility uses a superconducting (SC) linac for post-acceleration of rare isotopes up to about 18 MeV/u, while the SC linac of IFF facility is capable of accelerating uranium beams up to 200 MeV/u, 8 p mu A and proton beams up to 600 MeV, 660 mu A. Overall features of the KoRIA facility are presented with a focus on the accelerator design
The key feature of the Isotope Separation On-Line (ISOL) facility is its ability to provide highintensity and high-quality beams of neutron-rich isotopes with masses in the range of 80 − 160 by means of a 70-MeV proton beam directly impinging on uranium-carbide thin-disc targets to perform forefront research in nuclear structure, nuclear astrophysics, reaction dynamics and interdisciplinary fields like medical, biological and material sciences. The technical design of the 10-kW and the 35-kW direct fission targets with in-target fission rates of up to 10 14 fissions/s has been finished, and for the development of the ISOL fission-target chemistry an initial effort has been made to produce porous lanthanum-carbide (LaCx) discs as a benchmark for the final production of porous UCx discs. For the production of various beams, three classes of ion sources are under development at RISP (Rare Isotope Science Project), the surface ion source, the plasma ion source (FEBIAD), the laser ion source, and the engineering design of the FEBIAD is in progress for prototype fabrication. The engineering design of the ISOL target/ion source front-end system is also in progress, and a prototype will be used for an off-line test facility in front of the pre-separator. The technical designs of other basic elements at the ISOL facility, such as the RF-cooler, the high-resolution mass separator, and the A/q separator, have been finished, and the results, along with the future plans, are introduced.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.