The thermal properties of epoxy‐based binary composites comprised of graphene and copper nanoparticles are reported. It is found that the “synergistic” filler effect, revealed as a strong enhancement of the thermal conductivity of composites with the size‐dissimilar fillers, has a well‐defined filler loading threshold. The thermal conductivity of composites with a moderate graphene concentration of fg = 15 wt% exhibits an abrupt increase as the loading of copper nanoparticles approaches fCu ≈ 40 wt%, followed by saturation. The effect is attributed to intercalation of spherical copper nanoparticles between the large graphene flakes, resulting in formation of the highly thermally conductive percolation network. In contrast, in composites with a high graphene concentration, fg = 40 wt%, the thermal conductivity increases linearly with addition of copper nanoparticles. A thermal conductivity of 13.5 ± 1.6 Wm−1K−1 is achieved in composites with binary fillers of fg = 40 wt% and fCu = 35 wt%. It has also been demonstrated that the thermal percolation can occur prior to electrical percolation even in composites with electrically conductive fillers. The obtained results shed light on the interaction between graphene fillers and copper nanoparticles in the composites and demonstrate potential of such hybrid epoxy composites for practical applications in thermal interface materials and adhesives.

convert infrared light into the visible range are desirable as they can enable advanced schemes for photocatalysts 1 , solar energy harvesting 2 , deep tissue imaging 3 and phototherapy 4. Inorganic nanocrystals (NCs) functionalized with energy-accepting dyes form a promising platform to meet this demand. These materials achieve light upconversion by using photons absorbed by the NC to excite spin-triplet excitons centred on organic molecules tethered to their surface 5-7. Pairs of these excitons can merge through a process known as triplet fusion to produce high-energy spin-singlet states that emit visible light. Although upconversion efficiencies of >10% have been achieved by this approach 8,9 , these systems have exclusively employed NCs containing toxic heavy elements such as cadmium or lead (refs. 5,6,10), limiting their range of utility. Replacement of these NCs with nontoxic infrared absorbers is a key step in designing upconversion systems suitable for both biological and environmental applications.

We demonstrate the synthesis of hollow silicon carbide nanoparticles via a two-step process involving the non-thermal plasma synthesis of silicon nanoparticles, followed by their in-flight carbonization, also initiated by a non-thermal plasma. Simple geometric considerations associated with the expansion of the silicon lattice upon carbonization, in combination of the spherical geometry of the system, explain the formation of hollow nanostructures. This is in contrast with previous reports that justify the formation of hollow particles by means of out-diffusion of the core element, i.e., by the Kirkendall nanoscale effect. A theoretical analysis of the diffusion kinetics indicates that interaction with the ionized gas induces significant nanoparticle heating, allowing for the fast transport of carbon into the silicon particle and for the subsequent nucleation of the beta-silicon carbide phase. This work confirms the potential of non-thermal plasma processes for the synthesis of nanostructures composed of high-melting point materials, and suggests that such processes can be tuned to achieve morphological control. V C 2015 AIP Publishing LLC.

No abstract

Silicon nanoparticles produced via a plasma-based technique have been sintered into bulk nanostructured samples. These samples have micron-sized crystalline domains and contain well-dispersed oxide nanoinclusions. We have compared the thermoelectric performance of such structure to that of a control sample produced by sintering ball-milled silicon powders. The control sample has lower precipitate density and is composed of nanograins. Despite the stark difference in nanostructure, both samples have comparable thermal conductivity, and the sample with nanoinclusions has higher power factor and ZT. This result confirms that grain size engineering is not the only promising route to achieving improved thermoelectric performance. IMPACT STATEMENTBy controlling the feedstock powder processing technique, it is possible to obtain well-dispersed nanoinclusions in sintered bulk samples. These are as effective at reducing thermal transport properties as grain boundaries.