The development of the inductively driven plasma wind tunnel PWK3, which enables the electrodeless generation of high-enthalpy plasmas for the development of heat shield materials required for space vehicles performing entry manoeuvres in the atmospheres of Venus, Earth and Mars, is described. The facility with its modular inductive plasma generators allows operation with gases such as carbon dioxide, air, oxygen and nitrogen and was qualified for thermal plasma powers up to 60 kW. Previously developed models for determining plasma properties and plasma source related characteristics enable a maximum plasma power in combination with long operational periods using different operational gases and gas mixtures. This is achieved by an optimization using the optimum operational frequency, a minimization of field losses using very thin plasma tube wall thicknesses and the successful application of MHD effects. Based on the solved cylinder problem for ICPs, a one-dimensional model for radial Lorentz forces and magnetic pressure has been developed. Here, a synthesis of previously published data and works is made where the new algebraic model for the calculation of Lorentz forces and magnetic pressures in an ICP was used and applied to experimental data. In addition, results from the model using the experimental data are shown to be consistent and, in addition, a comparison with a simpler model based on the well-known exponential approach for ICPs showed that the simpler model is covered without fail by the new model. The new model also states that there is a maximum of the Lorentz forces over the damping parameter d/δ (plasma diameter divided by skin depth) which almost corresponds with the position of the maximum plasma power of the cylindric model for ICPs. For the magnetic pressure the position of the maximum pressure is identical to the value for d/δ for the maximum plasma power.

No abstract

No abstract

No abstract

No abstract