Propane dehydrogenation (PDH) to propene is an important alternative to oil-based cracking processes, to produce this industrially important platform chemical1,2. The commercial PDH technologies utilizing Cr-containing (refs. 3,4) or Pt-containing (refs. 5–8) catalysts suffer from the toxicity of Cr(vi) compounds or the need to use ecologically harmful chlorine for catalyst regeneration9. Here, we introduce a method for preparation of environmentally compatible supported catalysts based on commercial ZnO. This metal oxide and a support (zeolite or common metal oxide) are used as a physical mixture or in the form of two layers with ZnO as the upstream layer. Supported ZnOx species are in situ formed through a reaction of support OH groups with Zn atoms generated from ZnO upon reductive treatment above 550 °C. Using different complementary characterization methods, we identify the decisive role of defective OH groups for the formation of active ZnOx species. For benchmarking purposes, the developed ZnO–silicalite-1 and an analogue of commercial K–CrOx/Al2O3 were tested in the same setup under industrially relevant conditions at close propane conversion over about 400 h on propane stream. The developed catalyst reveals about three times higher propene productivity at similar propene selectivity.

Due to the complexity of heterogeneous catalysts, identification of active sites and the ways for their experimental design are not inherently straightforward but important for tailored catalyst preparation. The present study reveals the active sites for efficient C–H bond activation in C1–C4 alkanes over ZrO2 free of any metals or metal oxides usually catalysing this reaction. Quantum chemical calculations suggest that two Zr cations located at an oxygen vacancy are responsible for the homolytic C–H bond dissociation. This pathway differs from that reported for other metal oxides used for alkane activation, where metal cation and neighbouring lattice oxygen form the active site. The concentration of anion vacancies in ZrO2 can be controlled through adjusting the crystallite size. Accordingly designed ZrO2 shows industrially relevant activity and durability in non-oxidative propane dehydrogenation and performs superior to state-of-the-art catalysts possessing Pt, CrOx, GaOx or VOx species.

Non-oxidative dehydrogenation of propane to propene is an established large-scale process that, however, faces challenges, particularly in catalyst development; these are the toxicity of chromium compounds, high cost of platinum, and catalyst durability. Herein, we describe the design of unconventional catalysts based on bulk materials with a certain defect structure, for example, ZrO2 promoted with other metal oxides. Comprehensive characterization supports the hypothesis that coordinatively unsaturated Zr cations are the active sites for propane dehydrogenation. Their concentration can be adjusted by varying the kind of ZrO2 promoter and/or supporting tiny amounts of hydrogenation-active metal. Accordingly designed Cu(0.05 wt %)/ZrO2 -La2 O3 showed industrially relevant activity and durability over ca. 240 h on stream in a series of 60 dehydrogenation and oxidative regeneration cycles between 550 and 625 °C.

No abstract

Environmentally friendly and low-cost catalysts are required for large-scale non-oxidative dehydrogenation of propane to propene (PDH) to replace currently used CrO x -or Pt-based catalysts. This work introduces ZnO-containing ZrO 2 -or MZrO x -supported (M=Ce, La, Ti or Y) catalysts. The most active materials outperformed the state-of-the-art catalysts with supported CrO x , GaO x , ZnO x or VO x species as well as bulk ZrO 2 -based catalysts without ZnO. The spacetime yield of propene of 1.25 kg C3H6 •kg -1 cat •h -1 at a propane conversion of about 30% with propene selectivity of 95% was obtained over Zn(4 wt%)/TiZrO x at 550°C.For deriving key insights into the structure of active sites, reactivity, selectivity and onstream stability, the catalysts were characterized by XRD, HRTEM, EDX mapping, XPS, X-ray absorption, CO-TPR, CO 2 -TPD, NH 3 -TPD, Pyridine-FTIR, operando UV-Vis spectroscopy, Raman spectroscopy, TPO and temporal analysis of products. In contrast with previous reports used bulk ZrO 2 -based catalysts without ZnO, coordinatively unsaturated Zr cations are not the main active sites in the ZnO-containing catalysts.Supported ZnO x species were concluded to participate in the PDH reaction. The current X-ray absorption analysis proved that their structure is affected by the type of metal oxide used as dopant for ZrO 2 and on crystallinity of ZrO 2 . Isolated tricoordinated Zn 2+ species