This work investigates the potential use of direct ultrasonic vibration as an aid to penetration of granular material. Compared with non-ultrasonic penetration, required forces have been observed to reduce by an order of magnitude. Similarly, total consumed power can be reduced by up to 27%, depending on the substrate and ultrasonic amplitude used. Tests were also carried out in high-gravity conditions, displaying a trend that suggests these benefits could be leveraged in lower gravity regimes.

No abstract

This paper describes the effects of ultrasonically-assisted penetration of granular materials, in high gravity situations. The experimental rig, instrumented to obtain penetration force, rate and power both with and without ultrasonic assistance, was used to drive a penetrator into a granular material inside the ESA Large Diameter Centrifuge at accelerations of up to 10 g during early September 2015. Ultrasonic penetration proved to be most beneficial at lower levels of accelerations, reducing the required overhead weight by 80%, and the total power consumption by 27%.

No abstract

This work presents the methods used and initial findings of the control of the model for an autonomous trenchless drilling device, with bioinspired worm-like locomotion. The model is validated using Inverse Simulation. The initial control is detailed with data from the simulation and experimental device.