The Compact Muon Solenoid (CMS) experiment operating at the CERN (European Laboratory for Nuclear Physics) Large Hadron Collider (LHC) is in the process of upgrading several of its detector systems. Adding more individual detector components brings the need to test and commission those components separately from existing ones so as not to compromise physics data-taking. The CMS Trigger, Timing and Control (TTC) system had reached its limits in terms of the number of separate elements (partitions) that could be supported. A new Timing and Control Distribution System (TCDS) has been designed, built and commissioned in order to overcome this limit. It also brings additional functionality to facilitate parallel commissioning of new detector elements. We describe the new TCDS system and its components and show results from the first operational experience with the TCDS system in CMS. Abstract-The Compact Muon Solenoid (CMS) experiment operating at the CERN (European Laboratory for Nuclear Physics) Large Hadron Collider (LHC) is in the process of upgrading several of its detector systems. Adding more individual detector components brings the need to test and commission those components separately from existing ones so as not to compromise physics data-taking. The CMS Trigger, Timing and Control (TTC) system had reached its limits in terms of the number of separate elements (partitions) that could be supported. A new Timing and Control Distribution System (TCDS) has been designed, built and commissioned in order to overcome this limit. It also brings additional functionality to facilitate parallel commissioning of new detector elements. The new TCDS system and its components will be described and results from the first operational experience with the TCDS in CMS will be shown.
In 2017 a new pixel detector was installed in the CMS detector. This so-called Phase-1 pixel detector features four barrel layers in the central region and three disks per end in the forward regions. The upgraded pixel detector requires an upgraded data acquisition (DAQ) system to accept a new data format and larger event sizes. A new DAQ and control system has been developed based on a combination of custom and commercial microTCA parts. Custom mezzanine cards on standard carrier cards provide a front-end driver for readout, and two types of front-end controller for configuration and the distribution of clock and trigger signals. Before the installation of the detector the DAQ system underwent a series of integration tests, including readout of the pilot pixel detector, which was constructed with prototype Phase-1 electronics and operated in CMS from 2015 to 2016, quality assurance of the CMS Phase-1 detector during its assembly, and testing with the CMS Central DAQ. This paper describes the Phase-1 pixel DAQ and control system, along with the integration tests and results. A description of the operational experience and performance in data taking is included.
The CMS experiment will be upgraded for operation at the HighLuminosity LHC to maintain and extend its physics performance under extreme pileup conditions. Upgrades will include an entirely new tracking system, supplemented by a track finder processor providing tracks at Level-1, as well as a high-granularity calorimeter in the endcap region. New front-end and back-end electronics will also provide the Level-1 trigger with high-resolution information from the barrel calorimeter and the muon systems. The upgraded Level-1 processors, based on powerful FPGAs, will be able to carry out sophisticated feature searches with resolutions often similar to the offline ones, while keeping pileup effects under control. In this paper, we discuss the feasibility of a system capturing Level-1 intermediate data at the beam-crossing rate of 40 MHz and carrying out online analyzes based on these limited-resolution data. This 40 MHz scouting system would provide fast and virtually unlimited statistics for detector diagnostics, alternative luminosity measurements and, in some cases, calibrations. It has the potential to enable the study of otherwise inaccessible signatures, either too common to fit in the Level-1 accept budget, or with requirements which are orthogonal to “mainstream” physics, such as long-lived particles. We discuss the requirements and possible architecture of a 40 MHz scouting system, as well as some of the physics potential, and results from a demonstrator operated at the end of Run-2 using the Global Muon Trigger data from CMS. Plans for further demonstrators envisaged for Run-3 are also discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.