There are numerous potential applications for superconducting tapes based on YBa(2)Cu(3)O(7-x) (YBCO) films coated onto metallic substrates. A long-established goal of more than 15 years has been to understand the magnetic-flux pinning mechanisms that allow films to maintain high current densities out to high magnetic fields. In fact, films carry one to two orders of magnitude higher current densities than any other form of the material. For this reason, the idea of further improving pinning has received little attention. Now that commercialization of YBCO-tape conductors is much closer, an important goal for both better performance and lower fabrication costs is to achieve enhanced pinning in a practical way. In this work, we demonstrate a simple and industrially scaleable route that yields a 1.5-5-fold improvement in the in-magnetic-field current densities of conductors that are already of high quality.

Since the discovery of carbon nanotubes in 1991 by Iijima, there has been great interest in creating long, continuous nanotubes for applications where their properties coupled with extended lengths will enable new technology developments. For example, ultralong nanotubes can be spun into fibres that are more than an order of magnitude stronger than any current structural material, allowing revolutionary advances in lightweight, high-strength applications. Long metallic nanotubes will enable new types of micro-electromechanical systems such as micro-electric motors, and can also act as a nanoconducting cable for wiring micro-electronic devices. Here we report the synthesis of 4-cm-long individual single-wall carbon nanotubes (SWNTs) at a high growth rate of 11 microm s(-1) by catalytic chemical vapour deposition. Our results suggest the possibility of growing SWNTs continuously without any apparent length limitation.

Improved electron transport along a carbon nanotube (CNT) fiber when it is spun from an array of longer nanotubes is reported. The effect of chemical post‐treatments is also demonstrated. For example, the covalent bonding of gold nanoparticles to the CNT fibers remarkably improves conductivity (see figure), whereas annealing CNT fibers in a hydrogen‐containing atmosphere leads to a dramatic decrease in conductivity.

From the stone ages to modern history, new materials have often been the enablers of revolutionary technologies.[1] For a wide variety of envisioned applications in space exploration, energy-efficient aircraft, and armor, materials must be significantly stronger, stiffer, and lighter than what is currently available. Carbon nanotubes (CNTs) have extremely high strength, [2][3][4][5] very high stiffness, [6,7] low density, good chemical stability, and high thermal and electrical conductivities.[8]These superior properties make CNTs very attractive for many structural applications and technologies. Here we report CNT fibers that are many times stronger and stiffer per weight than the best existing engineering fibers and over twenty times better than other reported CNT fibers. Additionally, our CNT fibers are nonbrittle and tough, making them far superior to existing materials for preventing catastrophic failure. These new CNT fibers will not only make tens of thousands of products stronger, lighter, safer, and more energy efficient, but they will also bring to fruition many envisioned technologies that have been to date unavailable because of material restrictions. Strong, stiff, and lightweight are critical property requirements for materials that are used in the construction of space shuttles, airplanes, and space structures. These properties are assessed by a material's specific strength and specific stiffness, which are defined as the strength or stiffness (Young's modulus) of a material divided by its density.[9] The combination of high strength, high stiffness, and low density affords CNTs with extremely high values for specific strength and specific stiffness. The most effective way to utilize these properties is to assemble CNTs into fibers. However, despite extensive worldwide efforts to date, the specific strength and specific stiffness of CNT fibers that have been reported by various research groups are much lower than currently available commercial fibers. [10][11][12][13][14][15][16][17][18][19][20][21][22] In early studies, researchers attempted to reinforce polymer fibers with short CNTs, but the reinforcement was limited by several issues, including poor dispersion, poor alignment, poor load transfer, and a low CNT volume fraction. [10][11][12][13][14][15] Recently, pure CNT fibers (also called yarns)were reported with and without twisting. [16][17][18][19][20][21][22] For example, Zhang et al. [20] demonstrated that spinning from aligned CNT arrays could significantly improve the strength of CNT fibers by twisting them. However, to date no breakthrough has been reported in the specific strength and specific stiffness of CNT fibers.Here we report CNT fibers with values for specific strength and specific stiffness that are much higher than values reported for any current engineering fibers as well as previously reported CNT fibers. As shown in Figure 1, the specific strength COMMUNICATION 4198

Arrays of well‐aligned, ca. 4.7 mm long carbon nanotubes (CNTs) are grown in a simple, safe, and cost‐effective manner using an efficient Al2O3/Fe catalyst prepared by an ion‐beam assisted deposition technique (see figure). Importantly, the as‐synthesized CNT arrays with lengths ranging from 500 μm to 1.5 mm are conducive to spinning, and CNT fibers spun from such long CNT arrays show remarkably improved tensile strength.