Synthesis and characterization of iron oxide nanoparticles coated with a large molar weight dextran for environmental applications are reported. The first experiments involved the synthesis of iron oxide nanoparticles which were coated with dextran at different concentrations. The synthesis was performed by a co-precipitation technique, while the coating of iron oxide nanoparticles was carried out in solution. The obtained nanoparticles were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction spectrometry, Fourier transform infrared spectroscopy and superconducting quantum interference device magnetometry. The results demonstrated a successful coating of iron oxide nanoparticles with large molar weight dextran, of which agglomeration tendency depended on the amount of dextran in the coating solution. SEM and TEM observations have shown that the iron oxide nanoparticles are of about 7 nm in size.

Removing heavy metals from wastewaters is a challenging process that requires constant attention and monitoring, as heavy metals are major wastewater pollutants that are not biodegradable and thus accumulate in the ecosystem. In addition, the persistent nature, toxicity and accumulation of heavy metal ions in the human body have become the driving force for searching new and more efficient water treatment technologies to reduce the concentration of heavy metal in waters. Because the conventional techniques will not be able to keep up with the growing demand for lower heavy metals levels in drinking water and wastewaters, it is becoming increasingly challenging to implement technologically advanced alternative water treatments. Nanotechnology offers a number of advantages compared to other methods. Nanomaterials are more efficient in terms of cost and volume, and many process mechanisms are better and faster at nanoscale. Although nanomaterials have already proved themselves in water technology, there are specific challenges related to their stability, toxicity and recovery, which led to innovations to counteract them. Taking into account the multidisciplinary research of water treatment for the removal of heavy metals, the present review provides an updated report on the main technologies and materials used for the removal of heavy metals with an emphasis on nanoscale materials and processes involved in the heavy metals removal and detection.

No abstract

In the paper, hydroxyapatite coatings enriched with Ti were prepared as a possible candidate for biomedical applications, especially for implantable devices that are in direct contact with bone.

The use of recycled polypropylene (RPP) as raw material for various industries has been known. However, the mechanical and thermal properties of recycled products are lower than those of raw material. The objective of this study was to obtain and investigate the modified recycled polypropylene (RPP) with commercial elastomers for possible applications. The compounded RPP-based thermoplastic elastomers were investigated in order to determine their thermal properties (melt flow index (MFI), differential scanning calorimetry (DSC), VICAT softening temperature (VST), and heat deflection temperature (HDT)), structural characteristics (optical microscopy, atomic force microscopy (AFM), and X-ray diffraction (XRD)), and mechanical properties (tensile properties, density, and IZOD impact). The RPP compounded with 10% elastomer recorded higher tensile properties than the unmodified RPP. Also, IZOD impact strength increased from4.3±0.2 kJ/m2(registered for RPP) to21.7±2.5 kJ/m2for the PPR/SIS30 compound, while the degree of crystallinity decreased for all compounds. The obtained results recommend the RPP/elastomers compounds both for environmental remediation from postconsumer PP wastes and to realize new goods with high performance for various applications.