SYPRO Ruby dye is a permanent stain comprised of ruthenium as part of an organic complex that interacts noncovalently with proteins. SYPRO Ruby Protein Gel Stain provides a sensitive, gentle, fluorescence-based method for detecting proteins in one-dimensional and two-dimensional sodium dodecyl sulfate-polyacrylamide gels. Proteins are fixed, stained from 3h to overnight and then rinsed in deionized water or dilute methanol/acetic acid solution for 30 min. The stain can be visualized using a wide range of excitation sources commonly used in image analysis systems including a 302 nm UV-B transilluminator, 473 nm second harmonic generation (SHG) laser, 488 nm argon-ion laser, 532 nm yttrium-aluminum-garnet (YAG) laser, xenon arc lamp, blue fluorescent light bulb or blue light-emitting diode (LED). The sensitivity of SYPRO Ruby Protein Gel Stain is superior to colloidal Coomassie Brilliant Blue (CBB) stain or monobromobimane labeling and comparable with the highest sensitivity silver or zinc-imidazole staining procedures available. The linear dynamic range of SYPRO Ruby Protein Gel stain extends over three orders of magnitude, which is vastly superior to silver, zinc-imidazole, monobromobimane and CBB stain. The fluorescent stain does not contain superfluous chemicals (formaldehyde, glutaraldehyde, Tween-20) that frequently interfere with peptide identification in mass spectrometry. While peptide mass profiles are severely altered in protein samples prelabeled with monobromobimane, successful identification of proteins by peptide mass profiling using matrix-assisted laser desorption/ionization mass spectrometry was easily performed after protein detection with SYPRO Ruby Protein Gel stain.

SYPRO Ruby dye is a permanent stain comprised of ruthenium as part of an organic complex that interacts noncovalently with proteins. SYPRO Ruby Protein Gel Stain provides a sensitive, gentle, fluorescence-based method for detecting proteins in one-dimensional and two-dimensional sodium dodecyl sulfate-polyacrylamide gels. Proteins are fixed, stained from 3h to overnight and then rinsed in deionized water or dilute methanol/acetic acid solution for 30 min. The stain can be visualized using a wide range of excitation sources commonly used in image analysis systems including a 302 nm UV-B transilluminator, 473 nm second harmonic generation (SHG) laser, 488 nm argon-ion laser, 532 nm yttrium-aluminum-garnet (YAG) laser, xenon arc lamp, blue fluorescent light bulb or blue light-emitting diode (LED). The sensitivity of SYPRO Ruby Protein Gel Stain is superior to colloidal Coomassie Brilliant Blue (CBB) stain or monobromobimane labeling and comparable with the highest sensitivity silver or zinc-imidazole staining procedures available. The linear dynamic range of SYPRO Ruby Protein Gel stain extends over three orders of magnitude, which is vastly superior to silver, zinc-imidazole, monobromobimane and CBB stain. The fluorescent stain does not contain superfluous chemicals (formaldehyde, glutaraldehyde, Tween-20) that frequently interfere with peptide identification in mass spectrometry. While peptide mass profiles are severely altered in protein samples prelabeled with monobromobimane, successful identification of proteins by peptide mass profiling using matrix-assisted laser desorption/ionization mass spectrometry was easily performed after protein detection with SYPRO Ruby Protein Gel stain.

The fluorescent hydrazide, Pro-Q Emerald 300 dye, may be conjugated to glycoproteins by a periodic acid Schiff's (PAS) mechanism. The glycols present in glycoproteins are initially oxidized to aldehydes using periodic acid. The dye then reacts with the aldehydes to generate a highly fluorescent conjugate. Reduction with sodium metabisulfite or sodium borohydride is not required to stabilize the conjugate. Though glycoprotein detection may be performed on transfer membranes, direct detection in gels avoids electroblotting and glycoproteins may be visualized within 2-4 h of electrophoresis. This is substantially more rapid than PAS labeling with digoxigenin hydrazide followed by detection with an antidigoxigenin antibody conjugate of alkaline phosphatase, or PAS labeling with biotin hydrazide followed by detection with horseradish peroxidase or alkaline phosphatase conjugates of streptavidin, which require more than eight hours to complete. Pro-Q Emerald 300 dye-labeled gels and blots may be poststained with SYPRO Ruby dye, allowing sequential two-color detection of glycosylated and nonglycosylated proteins. Both fluorophores are excited with mid-range UV illumination. Pro-Q Emerald 300 dye maximally emits at 530 nm (green) while SYPRO Ruby dye maximally emits at 610 nm (red). As little as 300 pg of alpha 1-acid glycoprotein (40% carbohydrate) and 1 ng of glucose oxidase (12% carbohydrate) or avidin (7% carbohydrate) are detectable in gels after staining with Pro-Q Emerald 300 dye. Besides glycoproteins, as little as 2-4 ng of lipopolysaccharide is detectable in gels using Pro-Q Emerald 300 dye while 250-1000 ng is required for detection with conventional silver staining. Detection of glycoproteins may be achieved in sodium dodecyl sulfate-polyacrylamide gels, two-dimensional gels and on polyvinylidene difluoride membranes.

SYPRO Tangerine stain is an environmentally benign alternative to conventional protein stains that does not require solvents such as methanol or acetic acid for effective protein visualization. Instead, proteins can be stained in a wide range of buffers, including phosphate-buffered saline or simply 150 mM NaCl using an easy, one-step procedure that does not require destaining. Stained proteins can be excited by ultraviolet light of about 300 nm or with visible light of about 490 nm. The fluorescence emission maximum of the dye is approximately 640 nm. Noncovalent binding of SYPRO Tangerine dye is mediated by sodium dodecyl sulfate (SDS) and to a lesser extent by hydrophobic amino acid residues in proteins. This is in stark contrast to acidic silver nitrate staining, which interacts predominantly with lysine residues or Coomassie Blue R, which in turn interacts primarily with arginine and lysine residues. The sensitivity of SYPRO Tangerine stain is similar to that of the SYPRO Red and SYPRO Orange stains - about 4-10 ng per protein band. This detection sensitivity is comparable to colloidal Coomassie blue staining and rapid silver staining procedures. Since proteins stained with SYPRO Tangerine dye are not fixed, they can easily be eluted from gels or utilized in zymographic assays, provided that SDS does not inactivate the protein of interest. This is demonstrated with in-gel detection of rabbit liver esterase activity using alpha-naphthyl acetate and Fast Blue BB dye as well as Escherichia coli beta-glucuronidase activity using ELF-97 beta-D-glucuronide. The dye is also suitable for staining proteins in gels prior to their transfer to membranes by electroblotting. Gentle staining conditions are expected to improve protein recovery after electroelution and to reduce the potential for artifactual protein modifications such as the alkylation of lysine and esterification of glutamate residues, which complicate interpretation of peptide fragment profiles generated by mass spectrometry.

The fluorescent hydrazide, Pro-Q Emerald 300 dye, may be conjugated to glycoproteins by a periodic acid Schiff's (PAS) mechanism. The glycols present in glycoproteins are initially oxidized to aldehydes using periodic acid. The dye then reacts with the aldehydes to generate a highly fluorescent conjugate. Reduction with sodium metabisulfite or sodium borohydride is not required to stabilize the conjugate. Though glycoprotein detection may be performed on transfer membranes, direct detection in gels avoids electroblotting and glycoproteins may be visualized within 2-4 h of electrophoresis. This is substantially more rapid than PAS labeling with digoxigenin hydrazide followed by detection with an antidigoxigenin antibody conjugate of alkaline phosphatase, or PAS labeling with biotin hydrazide followed by detection with horseradish peroxidase or alkaline phosphatase conjugates of streptavidin, which require more than eight hours to complete. Pro-Q Emerald 300 dye-labeled gels and blots may be poststained with SYPRO Ruby dye, allowing sequential two-color detection of glycosylated and nonglycosylated proteins. Both fluorophores are excited with mid-range UV illumination. Pro-Q Emerald 300 dye maximally emits at 530 nm (green) while SYPRO Ruby dye maximally emits at 610 nm (red). As little as 300 pg of alpha 1-acid glycoprotein (40% carbohydrate) and 1 ng of glucose oxidase (12% carbohydrate) or avidin (7% carbohydrate) are detectable in gels after staining with Pro-Q Emerald 300 dye. Besides glycoproteins, as little as 2-4 ng of lipopolysaccharide is detectable in gels using Pro-Q Emerald 300 dye while 250-1000 ng is required for detection with conventional silver staining. Detection of glycoproteins may be achieved in sodium dodecyl sulfate-polyacrylamide gels, two-dimensional gels and on polyvinylidene difluoride membranes.