Flotation of small solid objects and liquid droplets on water is critical to natural and industrial activities. This paper reports the floating mechanism of liquid marbles, or liquid droplets coated with hydrophobic microparticles. We used X-ray computed tomography (XCT) to acquire cross-sectional images of the floating liquid marble and interface between the different phases. We then analysed the shape of the liquid marble and the angles at the three-phase contact line (TPCL). We found that the small floating liquid marbles follow the mechanism governing the flotation of solid objects in terms of surface tension forces. However, the contact angles formed and deformation of the liquid marble resemble that of a sessile liquid droplet on a thin, elastic solid. For small liquid marbles, the contact angle varies with volume due to the deformability of the interface.

The surface oxidation of sulfide minerals, such as galena (PbS), in aqueous solutions is of critical importance in a number of applications. A comprehensive understanding of the formation of oxidation species at the galena surface is still lacking. Much controversy over the nature of these oxidation products exists. A number of oxidation pathways have been proposed, and experimental evidence for the formation of elemental sulfur, metal polysulfides, and metal-deficient lead sulfides in acidic conditions has been shown and argued. This paper provides further insight into the electrochemical behavior of galena at pH 4.5. Utilizing a novel experimental system that combines in situ electrochemical control and AC mode atomic force microscopy (AFM) surface imaging, the formation and growth of nanoscopic domains on the galena surface are detected and examined at anodic potentials. AFM phase images indicate that these domains have different material properties to the underlying galena. Continued oxidation results in nanoscopic pitting and the formation of microscopic surface domains, which are confirmed to be elemental sulfur by Raman spectroscopy. Further clarification of the presence of elemental sulfur is provided by Cryo-XPS. Polysulfide and metal-deficient sulfide could not be detected within this system.

acid dissolution of 4A and Na-Y synthetic zeolites and effects on Na-Y surface and particle properties,

No abstract

The surface oxidation and hydrophobicity of natural enargite (Cu(3)AsS(4)) and the formation of oxidation species at the mineral surface have been examined by a novel experimental approach that combines electrochemical techniques and atomic force microscopy (AFM). This approach allows for in-situ, synchronized electrochemical control and examination of the oxidative surface morphology of enargite. Combined with ex-situ cryo X-ray photoelectron spectroscopy surface analysis, the surface speciation of enargite surface oxidation has been obtained, comparing the newly fractured natural enargite surface with those that have been electrochemically oxidized at pHs 4 and 10. At pH 4, surface layer formations consisting of metal-deficient sulfide and elemental sulfur were identified, associated with a limited increase in root-mean-square (rms) roughness (1.228 to 3.143 nm) and apparent heterogeneous distribution of surface products as demonstrated by AFM imaging. A mechanism of initial rapid dissolution of Cu followed by diffusion-limited surface layer deposition was identified. At pH 10, a similar mechanism was identified although the differences between the initial and diffusion-limited phases were less definitive. Surface species were identified as copper sulfate and copper hydroxide. A significant increase in surface roughness was found as rms roughness increased from 0.795 to 9.723 nm. Dynamic (receding) contact angle measurements were obtained by a droplet evaporation method. No significant difference in the contact angle on a surface oxidized at pH 10 and the freshly polished surface was found. A significant difference was found between the polished surface and that oxidized at pH 4, with an increase in contact angle of about 13° (46° to 59°) after oxidation. Competing effects of hydrophilic (copper oxides and hydroxides) and hydrophobic (elemental sulfur) species on the mineral surface under oxidizing conditions at pH 4 and the change in surface roughness at pH 10 may contribute to the observed effects of electrochemically controlled oxidation on enargite hydrophobicity.