We describe a new device concept for digital microfluidics, based on an active matrix electrowetting on dielectric (AM-EWOD) device. A conventional EWOD device is limited by the number of electrical connections that can be made practically, which restricts the number and type of droplet operations. In an AM-EWOD, the patterned electrodes of a conventional EWOD device are replaced by a thin film transistor (TFT) array, as found in a liquid crystal display (LCD), facilitating independent control of each electrode. The arrays can have many thousand individually addressable electrodes, are fully reconfigurable and can be programmed to support multiple simultaneous operations. Each element is 210 μm × 210 μm in size and contains a circuit that measures the electrical impedance of the liquid above it. This is used to determine the presence and size of a droplet, a method that can improve assay reliability and accuracy. This sensor provides feedback, error detection and closed loop control of an assay sequence. We describe the design, fabrication and testing of a 64 × 64 format AM-EWOD device with impedance sensor functionality. A colorimetric assay is implemented on the device and used to measure glucose in human blood serum. Results are compared with the same assay performed on a microtitre plate.

The widespread dissemination of CTX-M extended spectrum β-lactamases among Escherichia coli bacteria, both in nosocomial and community environments, is a challenge for diagnostic bacteriology laboratories. We describe a rapid and sensitive detection system for analysis of DNA containing the blaCTX-M-15 gene using isothermal DNA amplification by recombinase polymerase amplification (RPA) on a digital microfluidic platform; active matrix electrowetting-on-dielectric (AM-EWOD). The devices have 16,800 electrodes that can be independently controlled to perform multiple and simultaneous droplet operations. The device includes an in-built impedance sensor for real time droplet position and size detection, an on-chip thermistor for temperature sensing and an integrated heater for regulating the droplet temperature. Automatic dispensing of droplets (45 nL) from reservoir electrodes is demonstrated with a coefficient of variation (CV) in volume of approximately 2%. The RPA reaction is monitored in real-time using exonuclease fluorescent probes. Continuous mixing of droplets during DNA amplification significantly improves target DNA detection by at least 100 times compared to a benchtop assay, enabling the detection of target DNA over four-order-of-magnitude with a limit of detection of a single copy within ~15 minutes.

In response to evidence of insect pollinator declines, organisations in many sectors, including the food and farming industry, are investing in pollinator conservation. They are keen to ensure that their efforts use the best available science. We convened a group of 32 ‘conservation practitioners’ with an active interest in pollinators and 16 insect pollinator scientists. The conservation practitioners include representatives from UK industry (including retail), environmental non-government organisations and nature conservation agencies. We collaboratively developed a long list of 246 knowledge needs relating to conservation of wild insect pollinators in the UK. We refined and selected the most important knowledge needs, through a three-stage process of voting and scoring, including discussions of each need at a workshop. We present the top 35 knowledge needs as scored by conservation practitioners or scientists. We find general agreement in priorities identified by these two groups. The priority knowledge needs will structure ongoing work to make science accessible to practitioners, and help to guide future science policy and funding. Understanding the economic benefits of crop pollination, basic pollinator ecology and impacts of pesticides on wild pollinators emerge strongly as priorities, as well as a need to monitor floral resources in the landscape

This paper introduces the possibility of in-situ assessment of loading and remaining strength in concrete structures by means of measuring discharge of electric current from loaded specimens.The paper demonstrates that the techniques have been applied to other rock-like materials, but that for the first time they are applied to cement based materials and a theoretical model is proposed in relation to the appearance of electrical signals during sample loading and up to fracture.A series of laboratory experiments on cement mortar specimens in simple uniaxial compression, and subsequently in bending -hence displaying both tension and compression -are described and show clear correlations between resulting strains and currents measured. Under uniaxial loading there is a well-defined relationship between the pressure-stimulated current (PSC) as a result of a monotonic mechanical loading regime.Similar results are observed in the three-point bending tests where a range of loading regimes is studied, including stepped changes in loading.While currents can be measured at low strains, best results seem to be obtained when strains approach and exceed yield stress values.This technique clearly has immense potential for structural health monitoring of cementbased structures. Both intermittent and continuous monitoring becomes possible, and given an ongoing campaign of monitoring, remaining strength can be estimated.