Abstract-In this paper, we present a novel linear-program formulation that yields "optimally safe" (OS) tension distributions in parallel cable-driven robots by the introduction of a slack variable. The slack variable also enables explicit computation of a near-optimal, feasible starting point. This, in turn, enables rapid computation of the OS tension distributions. The formulation also contains a parameter that can be used to steer cable tensions toward desired regions of operation. We present static results from two simulated robotic systems that demonstrate the ability of our formulation to avoid tension limits. Simulated execution of highly dynamic trajectories on both systems demonstrates rapid-computation abilities. Furthermore, we present experimental results from a real robotic system that further validate the importance of safe tension distributions.Index Terms-Cable tension distributions, parallel cable-driven robots, parallel robots, redundant robots.
Abstract-We present the Networked InfoMechanical System for Planar Translation, which is a novel two-degree-of-freedom (2-DOF) cable-driven robot with self-calibration and online driftcorrection capabilities. This system is intended for actuated sensing applications in aquatic environments. The actuation redundancy resulting from in-plane translation driven by four cables results in an infinite set of tension distributions, thus requiring realtime computation of optimal tension distributions. To this end, we have implemented a highly efficient, iterative linear programming solver, which requires a very small number of iterations to converge to the optimal value. In addition, two novel self-calibration methods have been developed that leverage the robot's actuation redundancy. The first uses an incremental displacement, or jitter method, whereas the second uses variations in cable tensions to determine end-effector location. We also propose a novel leastsquares drift-detection algorithm, which enables the robot to detect long-term drift. Combined with self-calibration capabilities, this drift-monitoring algorithm enables long-term autonomous operation. To verify the performance of our algorithms, we have performed extensive experiments in simulation and on a real system.
Falls are currently a leading cause of death from injury in the elderly. The usage of the conventional assistive cane devices is critical in reducing the risk of falls and is relied upon by over 4 million patients in the U.S.. While canes provide physical support as well as supplementary sensing feedback to patients, at the same time, these conventional aids also exhibit serious adverse effects that contribute to falls. The falls due to the improper usage of the canes are particularly acute in the elderly and disabled where reduced cognitive capacity accompanied by the burden of managing cane motion leads to increased risk. This paper describes the development of the SmartCane assistive system that encompasses broad engineering challenges that will impact general development of individualized, robust assistive and prosthetic devices. The SmartCane system combines advances in signal processing, embedded computing, and wireless networking technology to provide capabilities for remote monitoring, local signal processing, and real-time feedback on the cane usage. This system aims to reduce risks of injuries and falls by enabling training and guidance of patients in proper usage of assistive devices.
Abstract-We present NIMS3D, a novel 3-D cabled robot for actuated sensing applications. We provide a brief overview of the main hardware components. Next, we describe installation procedures, including novel calibration methods, that enable rapid in-field deployability for nonexpert end users, and provide simulations and experimental results to highlight their effectiveness. Kinematic and dynamic analysis of the system are provided, followed by a description of control methods. We provide experimental results that illustrate tracking of linear and nonlinear paths by NIMS3D. Thereafter, we briefly present an example of an actuated sensing task performed by the system. Finally, we describe methods of improving energy efficiency by leveraging nonlinear trajectories and energy-optimal tension distributions. Experimental and simulated results show that energy efficiency can be improved significantly by using optimized parabolic trajectories. Furthermore, we provide simulation results that demonstrate improved efficiency enabled by optimal, least norm tension distributions.Index Terms-Cabled robots, environmental robots, field robots, parallel robots, robotics in hazardous fields.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.