We synthesized a series of new low-band gap donor-acceptor copolymers containing 4,4 0 -bis(alkyl)-[6,6 0 -bithieno[3,2-b]pyrrolylidene]-5,5 0 (4H,4 0 H)-dione. This acceptor unit, so-called dithienoketopyrrole (DTKP), is an analogue of isoindigo, the phenyl rings of which are replaced by thiophenes. Donor moieties such as benzodithiophene, cyclopentadithiophene, fluorene, and dithienothiophene are polymerized with DTKP in an alternating fashion by Stille or Suzuki-Miyaura coupling methods. Exceedingly low-band gaps (E g ¼ 1.0-1.6 eV) were achieved in these copolymers through internal charge transfer interactions between the donor and acceptor moieties. The structural, photophysical, and electrochemical properties of the resultant copolymers were characterized, and field-effect transistor (FET) mobilities were measured. The copolymers showed electronic absorption spectra extending to the near infrared region (600-1400 nm) with absorption maxima at 745-971 nm, along with a low-lying LUMO of À3.8 eV. Density functional theory (DFT) calculation indicated high planarity for the copolymer backbone when compared to that of its phenyl-isoindigo counterparts. FET hole mobilities on the order of 10 À4 to 10 À3 cm 2 V À1 s À1 were obtained, demonstrating a feasibility to use them in organic photovoltaic cells.
The mechanism of photoinduced hydrogen evolution from water driven by the first photo-hydrogen-evolving molecular catalyst (1), given by a coupling of [Ru(bpy)(2)(5-amino-phen)](2+) and [PtCl(2)(4,4'-dicarboxy-bpy)] (bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline), was investigated in detail. The H(2) evolution rate was found to obey Michaelis-Menten enzymatic kinetics with regard to the concentration of EDTA (ethylenediamine tetra-acetic acid disodium salt, sacrificial electron donor), which indicates that an ion-pair formation between the dicationic 1 and the dianionic form of EDTA (pH 5) is a key step leading to H(2) formation. A 2:1 coupling product of 1 and ethylenediamine (i.e., a {Ru(II) (2)Pt(II) (2)} complex 2) was found to show significantly higher photo-hydrogen-evolving (PHE) activity than 1, which revealed the validity of the bimolecular activation proposed in our previous study. The PHE activity of 2 was also observed to be linear to the concentration of 2, which indicates that H(2) formation through the intermolecular path competes with the intramolecular path. Molecular orbital diagrams, conformational features, and PtH(water or acetic acid) hydrogen bonds were characterized by DFT calculations.
Azobenzene-derived photoactive polymers (P1-P3) containing pyrene pendants were designed and synthesized (M w ∼ 30 000) for the noncovalent functionalization of single-walled carbon nanotubes (SWNTs). P1-P3 were found to be highly effective for the solubilization of SWNTs in common organic solvents, resulting in hybrid materials with enhanced thermal stability. The solubilization process was mostly driven by the π-π stacking interactions of pyrene with SWNTs. It also brings the azobenzene chromophores to the vicinity of nanotube surface, thereby allowing the electronic interactions between them. In addition to that, stacking of the pyrene and subsequent wrapping of the polymer around CNT surface provides more volume for the photoisomerization of azobenzene. These effects eventually accelerate the kinetics of photoisomerization of azobenzene in the polymer-SWNT composite. The photoalignment property of the composite was also increased when compared to that of the parent polymer which was studied by means of photoinduced birefringence.
Two new alternating copolymers P1 and P2, of bithiazole (BT) and benzothiadiazoles (BTZ), differing in their side chain positioning at the thiophene units which sandwich the BT unit, were designed and synthesized. Both polymers exhibited broad absorption ranging from 300 to 700 nm with a narrow optical bandgap in the film state. Control over structural ordering of polymer chains was achieved in P1 by treating with a small amount of additive (1,8-octanedithiol, ODT) as evident by a large red shift of absorption peak and also from the XRD measurements. In contrast, no such effects were observed in the case of P2 in the presence of additive. Flash-photolysis time-resolved microwave conductivity (FP-TRMC) experiments revealed that the transient photoconductivity of P1 is far superior to that of P2, which is further increased when processed with ODT. The charge carrier mobility, as determined by the space-charge-limited current (SCLC) technique, indicates that P1 exhibits both electron and hole mobilities with a clear dominance of the latter. The charge carrier mobilities become higher and more balanced for ODT-modified P1 films compared to that of P1 alone. TRMC analysis revealed that the photoconductivity of P1 reduced when blended with PCBM in the absence of additive, whereas significant enhancement was obtained in presence of additive. The blend with P3HT exhibited an increase in photoconductivity in both the presence and absence of additive. In complete accordance with the TRMC results, in the absence of additive, P1 acted as an n-type material (P3HT as donor), whereas in presence of additive, it exhibited ambipolar nature acting as both n-type and p-type (P3HT as donor and PCBM as acceptor, respectively) material. Switching of the major charge carrier species was demonstrated simply by the presence of additive for P1 in the present paper.
Three 5,5'-disubstituted-2,2'-bipyridine ligands tethered to l-Asp-based peptide backbones having pendant viologen-modified branches, i.e., 5-ethoxycarbonyl-5'-(N-G(1)-carbamoyl)-2,2'-bipyridine ((4+)), 5,5'-bis(N-G(1)-carbamoyl)-2,2'-bipyridine ((8+)), and 5,5'-bis(N-G(2)-carbamoyl)-2,2'-bipyridine ((12+)), were prepared, where G(1) = Asp(NHG(3))-NHG(3), G(2) = Asp(NHG(3))-Asp(NHG(3))-NHG(3), and G(3) = -(CH(2))(2)-(+)NC(5)H(4)-C(5)H(4)N(+)-CH(3), i.e., 2-(1'-methyl-4,4'-bipyridinediium-1-yl)ethyl. These were reacted with cis-Ru(bpy)(2)Cl(2) to give three new dyads [Ru(bpy)(2)()](6+) ((6+)), [Ru(bpy)(2)()](10+) ((10+)), and [Ru(bpy)(2)()](14+) ((14+)), respectively, where bpy = 2,2'-bipyridine. All these dyads undergo extremely efficient intramolecular quenching leading to the formation of charge separated (CS) states (Ru(III)-MV(+) ), and display a triple exponential decay due to the presence of three classes of conformers with each exhibiting the individual rate of electron transfer. The lifetimes (contributions) were determined as 12.5 ps (94.2%), 791 ps (4.5%), and 18.3 ns (1.2%) for , 82.2 ps (79.9%), 1.12 ns (12.4%), and 4.60 ns (7.7%) for , and 43.6 ps (71.6%), 593 ps (20.2%), and 3.75 ns (8.1%) for . The forward electron transfer rate constants (k(ET)) for the major components were calculated as k(ET) = 8.3 x 10(10) s(-1) for , k(ET) = 1.2 x 10(10) s(-1) for , and k(ET) = 2.3 x 10(10) s(-1) for . Further, the lifetimes and quantum yields of charge separated states were determined as tau(CS) = 16 +/- 3 ns and Phi(CS) = 0.81 for , tau(CS) = 20 +/- 3 ns and Phi(CS) = 0.92 for , and tau(CS) = 20 +/- 3 ns and Phi(CS) = 0.64 for . The backward electron transfer rate constants (k(BET)) were also determined as 6.3 x 10(7), 5.0 x 10(7), and 5.0 x 10(7) s(-1) for , , and , respectively. From the analysis of electrical conductivity, the major ion-pair adducts in aqueous media were characterized as (PF(6))(5+) (52%) for , (PF(6))(2)(8+) (29%) and (PF(6))(3)(7+) (32%) for , and (PF(6))(3)(11+) (27%) and (PF(6))(4)(10+) (29%) for , at a total complex concentration of 0.04 mM. The present family is found to be the first example of a Ru(bpy)(3)(2+)-MV(2+) system in which three orders of magnitude of difference is achieved between the forward and backward electron transfer rate constants. These dyads were finally combined with a Pt(ii)-based H(2)-evolving catalyst, i.e., cis-diamminedichloroplatinum(ii), to ascertain the applicability of the system towards the visible light-induced water splitting processes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.