We present a high-resolution 2-D P-wave velocity model from a 225-km-long active seismic profile, collected over~60-75 Ma central Atlantic crust. The profile crosses five ridge segments separated by a transform and three nontransform offsets. All ridge discontinuities share similar primary characteristics, independent of the offset. We identify two types of crustal segment. The first displays a classic two-layer velocity structure with a high gradient Layer 2 (~0.9 s −1) above a lower gradient Layer 3 (0.2 s −1). Here, PmP coincides with the 7.5 km s −1 contour, and velocity increases to >7.8 km s −1 within 1 km below. We interpret these segments as magmatically robust, with PmP representing a petrological boundary between crust and mantle. The second has a reduced contrast in velocity gradient between the upper and lower crust and PmP shallower than the 7.5 km s −1 contour. We interpret these segments as tectonically dominated, with PmP representing a serpentinized (alteration) front. While velocity-depth profiles fit within previous envelopes for slow-spreading crust, our results suggest that such generalizations give a misleading impression of uniformity. We estimate that the two crustal styles are present in equal proportions on the floor of the Atlantic. Within two tectonically dominated segments, we make the first wide-angle seismic identifications of buried oceanic core complexes in mature (>20 Ma) Atlantic Ocean crust. They have a~20-km-wide "domal" morphology with shallow basement and increased upper crustal velocities. We interpret their midcrustal seismic velocity inversions as alteration and rock-type assemblage contrasts across crustal-scale detachment faults.
Estimating the range at which an acoustic receiver can detect greenhouse gas (e.g., CO 2 ) leakage from the sub-seabed is essential for determining whether passive acoustic techniques can be an effective environmental monitoring tool above marine carbon storage sites. Here we report results from a shallow water experiment completed offshore the island of Panarea, Sicily, at a natural CO 2 vent site, where the ability of passive acoustics to detect and quantify gas flux was determined at different distances. Cross-correlation methods determined the time of arrival for different travel paths which were confirmed by acoustic modelling. We develop an approach to quantify vent bubble size and gas flux. Inversion of the acoustic data was completed using the modelled impulse response to provide equivalent propagation ranges rather than physical ranges.The results show that our approach is capable of detecting a CO 2 bubble plume with a gas flux rate of 2.3 L/min at ranges of up to 8 m, and determining gas flux and bubble size accurately at ranges of up to 4 m in shallow water, where the bubble sound pressure is 10 dB above that of the ambient noise.
The release of greenhouse gases from both natural and man‐made sites has been identified as a major cause of global climate change. Extensive work has addressed quantifying gas seeps in the terrestrial setting while little has been done to refine accurate methods for determining gas flux emerging through the seabed into the water column. This paper investigates large‐scale methane seepage from the Scanner Pockmark in the North Sea with a new methodology that integrates data from both multibeam and single‐beam acoustics, with single‐beam data covering a bandwidth (3.5 to 200 kHz) far wider than that used in previous studies, to quantify the rate of gas release from the seabed into the water column. The multibeam data imaged a distinct fork‐shaped methane plume in the water column, the upper arm of which was consistently visible in the single‐beam data, while the lower arm was only intermittently visible. Using a novel acoustic inversion method, we determine the depth‐dependent gas bubble size distribution and the gas flux for each plume arm. Our results show that the upper plume arm comprises bubbles with radii ranging from 1 to 15 mm, while the lower arm consists of smaller bubbles with radii ranging from 0.01 to 0.15 mm. We extrapolate from these estimates to calculate the gas flux from the Scanner Pockmark as between 1.6 and 2.7 × 106 kg/year (272 to 456 L/min). This range was calculated by considering uncertainties together with Monte Carlo simulation. Our improved methodology allows more accurate quantification of natural and anthropogenic gas plumes in the water column.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.