This study investigates the effects of calcined and uncalcined eggshell particles (ESP) and sisal fiber (SF) on the mechanical and wear properties of eggshell particles/sisal fiber reinforced epoxy composites. Egg shell was processed to obtain calcined and uncalcined egg shell particulate of −43 μm and sisal fibers was extracted by soil retting and treated with NaOH. The composite was developed using the hand lay-up method by blending the selected materials in predetermined proportions. SEM/EDS and XRD of the egg shell particles were carried out while mechanical and wear properties of the developed composites were evaluated. SEM images of the fracture surfaces were also examined. The results showed that eggshell particles contain CaCO 3 and the uncalcined ESP/SF reinforced epoxy composite showed improved properties than the calcined ESP/SF composites in most of the tests performed. Also, it was observed that most of the tests gave the best results at different weight fractions. However, 3 wt. % emerged as the weight fraction with optimum values.
This research presents the behavior of dombeya buettneri fiber/graphite hybrid composites which was studied to harness a favorable balance between the inherent advantages and disadvantages of natural and synthetic reinforcements. The fibers after extraction were chemically treated for surface modification. The composite was developed using compression molding process by randomly dispersing the reinforcements in the polypropylene matrix in predetermined proportions. The developed samples were tested to ascertain the response of the materials to the selected properties. Experimental results showed that hybrid composite sample C which is a blend of 12 wt% dombeya buettneri fiber (DBF) and 8 wt% graphite particle (GP) gave enhanced results in many of the properties which includes; hardness, impact, thermal insulation and abrasion resistance properties. Also, the hybrid composites sample denoted as sample E which is the blend of 6 wt% DBF and 14 wt% GP produce higher enhancement in the flexural properties and Young’s Modulus of Elasticity than other samples. Composite sample reinforced with dombeya buettneri fiber as single reinforced composites performed more in ultimate tensile strength compared to other samples while graphite particle reinforced sample emerges as the best in thermal conductivity. Diffusion of water into the composites also obeys Fick’s law where sample C was seen to be the best among the composites. It was therefore, discovered that the synergy between the two reinforcements has encouraged the improvement of polypropylene (PP) properties in a unique mode.
In this study, wear resistance and some selected physical properties of pawpaw–glass fiber hybrid reinforced epoxy composites were investigated. Two different layers of pawpaw stem—linear and network structures—were extracted and chemically modified. Hybrid reinforced composites were developed comparatively from the two fiber structures and glass fiber using hand lay-up in an open mold production process. The wear resistance was studied via the use of a Taber Abrasion Tester while selected physical properties were also investigated. The influence of the fiber structure on the properties examined revealed that network structured pawpaw fiber was the best as reinforcement compared to the linearly structured fiber. The addition of these vegetable fibers to epoxy resin brought about improved thermal conductivity and increased the curing rate while the wear resistance of the corresponding developed composites were enhanced by 3 wt% and 15 wt% of fibers from linear and network pawpaw fibers. It was noticed that linearly structured pawpaw fiber had its best result at 3 wt% while network structured pawpaw fiber had its best result at 15 wt%.
The demand for durable and sustainable eco-friendly materials in recent times has caused many researchers to consider the use of plant fibers in composite development. In this research, the suitability of treated pawpaw fiber as a substitute for glass fiber was considered. The pawpaw fiber was extracted from the plant stem by dew retting and treated before been incorporated into the epoxy matrix. Two distinct fiber structures in linear and network forms were identified, separated, and used for the development of the composites. The composites were produced by incorporating a fixed amount of pawpaw fiber with a varied amount of glass fiber within 3–15 wt% in epoxy-based polymer matrix after which mechanical and biodegradation tests were carried out on the developed samples. Fractured surface morphology was also observed using a scanning electron microscope. The results revealed that the fiber structures influence the properties of the material. While mechanical properties were mostly enhanced by treated linear structure pawpaw fiber, biodegradation was highly promoted by treated network structure pawpaw fiber. Tensile (except for strain), hardness, and flexural properties were enhanced by the linear-structured treated pawpaw fiber, while biodegradability, impact, and tensile strain were improved by the network-structured treated pawpaw fiber compared to the control sample.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.