In this work, we present a stand-alone and fiber-coupled quantum-light source. The plug-and-play device is based on an optically driven quantum dot delivering single photons via an optical fiber. The quantum dot is deterministically integrated in a monolithic microlens which is precisely coupled to the core of an optical fiber via active optical alignment and epoxide adhesive bonding. The rigidly coupled fiber-emitter assembly is integrated in a compact Stirling cryocooler with a base temperature of 35 K. We benchmark our practical quantum device via photon auto-correlation measurements revealing g(2)(0) = 0.07 ± 0.05 under continuous-wave excitation and we demonstrate triggered non-classical light at a repetition rate of 80 MHz. The long-term stability of our quantum light source is evaluated by endurance tests showing that the fiber-coupled quantum dot emission is stable within 4% over several successive cool-down/warm-up cycles. Additionally, we demonstrate non-classical photon emission for a user-intervention-free 100-hour test run and stable single-photon count rates up to 11.7 kHz with a standard deviation of 4%.

Optimized light–matter coupling in semiconductor nanostructures is a key to understand their optical properties and can be enabled by advanced fabrication techniques. Using in situ electron beam lithography combined with a low-temperature cathodoluminescence imaging, we deterministically fabricate microlenses above selected InAs quantum dots (QDs), achieving their efficient coupling to the external light field. This enables performing four-wave mixing microspectroscopy of single QD excitons, revealing the exciton population and coherence dynamics. We infer the temperature dependence of the dephasing in order to address the impact of phonons on the decoherence of confined excitons. The loss of the coherence over the first picoseconds is associated with the emission of a phonon wave packet, also governing the phonon background in photoluminescence (PL) spectra. Using theory based on the independent boson model, we consistently explain the initial coherence decay, the zero-phonon line fraction, and the line shape of the phonon-assisted PL using realistic quantum dot geometries.

Integrated single-photon sources with high photon-extraction efficiency are key building blocks for applications in the field of quantum communications. We report on a bright single-photon source realized by on-chip integration of a deterministic quantum dot microlens with a 3D-printed multilens micro-objective. The device concept benefits from a sophisticated combination of in situ 3D electron-beam lithography to realize the quantum dot microlens and 3D femtosecond direct laser writing for creation of the micro-objective. In this way, we obtain a high-quality quantum device with broadband photon-extraction efficiency of (40 ± 4)% and high suppression of multiphoton emission events with g(2)(τ = 0) < 0.02. Our results highlight the opportunities that arise from tailoring the optical properties of quantum emitters using integrated optics with high potential for the further development of plug-and-play fiber-coupled single-photon sources.

We report on the experimental study and numerical analysis of chiral light-matter coupling in deterministically fabricated quantum dot (QD) waveguide structures. We apply in-situ electron beam lithography to deterministically integrate single InGaAs/GaAs QDs into GaAs-DBR waveguides to systematically explore the dependence of chiral coupling on the position of the QD inside the waveguide. By a series of micro-photoluminescence measurements, we determine the directionality contrast of emission into left and right traveling waveguide modes revealing a maximum of 0.93 for highly off-center QDs and an oscillatory dependence of this contrast on the QD position. In numerical simulations we obtain insight into chiral light-matter coupling by computing the light field emitted by a circularly polarized source and its overlap with multiple guided modes of the structure, which enables us to calculate directional β-factors for the quantum emitters. The calculated dependence of the directionality on the off-center QD position is in good agreement with the experimental data. It confirms the control of chiral effects in deterministically fabricated QD-waveguide systems with high potential for future non-reciprocal on-chip systems required for quantum information processing.

Spectrally-tunable quantum light sources are key elements for the realization of long-distance quantum communication. A deterministically fabricated single-photon source with a photon extraction efficiency of η =(20 ± 2) %, a maximum tuning range of ΔE =  2.5 meV and a minimum g(2)(τ = 0) = 0.03 ± 0.02 is presented. The device consists of a single pre-selected quantum dot (QD) monolithically integrated into a microlens that is bonded onto a piezoelectric actuator via gold thermocompression bonding. Here, a thin gold layer simultaneously provides strain transfer and acts as a backside mirror for the QD-microlens to maximize the photon extraction efficiency. The QD-microlens structure is patterned via 3D in-situ electron-beam lithography (EBL), which allows us to pre-select and integrate suitable QDs based on their emission intensity and energy with a spectral accuracy of 1 meV for the final device. Together with strain fine-tuning, this enables the scalable realization of single-photon sources with identical emission energy. Moreover, we show that the emission energy of the source can be stabilized to µeV accuracy by closed-loop optical feedback. Thus, the combination of deterministic fabrication, spectral-tunability and high broadband photon-extraction efficiency makes the QD-microlens single-photon source an interesting building block for the realization of quantum communication networks.