By-products of fruit and vegetable processing are an inexpensive and sustainable source of dietary fiber, potentially offering valuable functional properties such as water binding and thickening. Due to these favorable properties, they can be utilized to reformulate widely-consumed foods, e.g., bakery products or beverages. In this study, apple pomace was used as a model system to study whether extrusion technology affects food by-product functionality and thus has the potential to broaden the application of by-products in foods. The effect of the process parameters and the extent of thermo-mechanical treatment on the structural and functional properties of apple pomace were analyzed after extrusion trials using various screw speeds, water contents, and barrel temperatures. Compared to the raw material, apple pomace extruded at Tbarrel = 100 °C, n = 700 min−1 and mH2O = 17% showed an increased water solubility up to 33%. The water absorption increased from 5 to 19 Pa·s and the paste viscosity from 5 to 339 Pa·s by extrusion processing. Analyses of dietary fiber contents and fiber polysaccharide structures revealed that thermo-mechanical stress (n = 700 min−1, mH2O = 22%) increased the content of soluble dietary fiber from 12.5 to 16.7 g/100 g dry matter, and that the harshest conditions even enabled the formation of low-molecular-weight dietary fiber. Arabinans (as neutral rhamnogalacturonan I side chains) appeared to be most sensitive to thermo-mechanical stress, whereas xylans (i.e., a group of minor polysaccharides) were an example of a more stable fiber polysaccharide. Also, the degree of methylation of the pectic polysaccharides was strongly reduced from 50% to 15% when thermo-mechanical stress was applied. Imaging and pore size analysis showed that extrusion processing could disrupt the rigid cell wall macromolecular structure.
Food by-products can be used as natural and sustainable food ingredients. However, a modification is needed to improve the technofunctional properties according to the specific needs of designated applications. A lab-scale twin-screw extruder was used to process enzymatically treated apple pomace from commercial fruit juice production. To vary the range of the thermomechanical treatment, various screw speeds (200, 600, 1000 min−1), and screw configurations were applied to the raw material. Detailed chemical and functional analyses were performed to develop a comprehensive understanding of the impact of the extrusion processing on apple pomace composition and technofunctional properties as well as structures of individual polymers. Extrusion at moderate thermomechanical conditions increased the water absorption, swelling, and viscosity of the material. An increase in thermomechanical stress resulted in a higher water solubility index, but negatively affected the water absorption index, viscosity, and swelling. Scanning electron microscopy showed an extrusion-processing-related disruption of the cell wall. Dietary fiber analysis revealed an increase of soluble dietary fiber from 12.6 to 17.2 g/100 g dry matter at maximum thermo-mechanical treatment. Dietary fiber polysaccharide analysis demonstrated compositional changes, mainly in the insoluble dietary fiber fraction. In short, pectin polysaccharides seem to be susceptible to thermo-mechanical stress, especially arabinans as neutral side chains of rhamnogalacturonan I.
Fiber rich by-products derived from primary agri-food production such as carrot pomace and potato pulp are available in large quantities, but their functional properties do not necessarily meet the requirements for use in specific food applications. Thermomechanical treatment (extrusion) of carrot pomace and potato pulp changes both dietary fiber polysaccharide structures and technofunctionality of the materials. Solubility of dietary fiber constituents changes, resulting in higher levels of water- and ethanol-soluble poly-/oligosaccharides. On a structural level, particularly arabinans and galactans as neutral side chains of type I rhamnogalacturonan were degraded under thermomechanical stress. Galacturonic acid portions (preferably from homogalacturonan or rhamnogalacturonan I) and their degree of methylation were also negatively affected. On a functional level, water absorption of potato pulp increased up to three times following extrusion, whereas water absorption of carrot pomace decreased with extrusion processing. The observed, enhanced swelling behavior for extruded carrot pomace was accompanied by higher complex viscosity of the dispersions. Swelling of potato pulp particles increased largely (up to 25 times) following extrusion, resulting in highly viscous pastes. Phytochemicals were retained up to 50%, heat-induced contaminants were formed only to a small extent (up to 8.1 mg 5-hydroxymethylfurfural·kg− 1 dry matter for carrot pomace; up to 71 µg acrylamide·kg− 1 dry matter for potato pulp). Graphical abstract
Food by-products can be modified by extrusion processing. However, the impact of thermal and mechanical stress, respectively, on the structure and thus functional properties of dietary fiber-rich food by-products is still unknown. In the extrusion process, thermal and mechanical stress are coupled, not constant, and difficult to measure or calculate. Thus, their influence on structural changes and functional properties cannot be evaluated separately. In this work, a specific shear cell, denoted by closed cavity rheometer, was used to treat apple pomace with defined thermal and/or mechanical stress. Dietary fiber composition and fiber polysaccharide structures appeared to be more susceptible to high temperatures than mechanical stress. With increasing temperature (and mechanical stress) soluble and low-molecular-weight soluble dietary fiber contents increased, whereas insoluble fiber contents decreased. Arabinans as rhamnogalacturonan type I polysaccharides and galacturonic acid containing pectic polysaccharides were identified as being most susceptible to degradation under these conditions. Furthermore, the defined treatment affected the functional properties. Although changes in the water solubility index (WSI) and/or the water absorption index (WAI) were not detected up to 90 °C, WSI and WAI decreased significantly at a treatment temperature of 120 °C. However, at very high temperatures (160 °C), WSI and WAI increased. The application of shear and longer treatment times resulted in higher WSI values and complex viscosities as compared to low shear stress. Graphic abstract
Verarbeitungsbedingte Nebenströme fallen in großen Mengen als Abfallprodukte der obstund gemüseverarbeitenden Industrie an. Diese enthalten mitunter ernährungsphysiologisch positiv bewertete Bestandteile der menschlichen Ernährung. Dazu zählen u.a. Ballaststoffe und bestimmte sekundäre Pflanzenmetaboliten. Die pflanzliche Zellwand stellt dabei die Hauptballaststoffquelle dar, und abhängig von der Zusammensetzung der Komponenten weisen diese gesundheitsfördernde Eigenschaften auf. Neben einer möglichen Beeinflussung der ernährungsphysiologischen Eigenschaften kann das Einbringen von Polysacchariden aus Nebenströmen in Lebensmitteln deren technofunktionellen Eigenschaften, z. B. die Wasserbindung, beeinflussen. Niedermolekulare Inhaltsstoffe wie (poly)phenolische Verbindungen oder Carotinoide können als Antioxidantien fungieren und damit u. a. die Lipidoxidation verlangsamen. Extrusion kann die technofunktionellen Eigenschaften von Nebenströmen verändern und ggf. eine zielgerichtete Funktionalisierung ermöglichen. Eine ausführliche Charakterisierung der chemischen Zusammensetzung der Inhaltsstoffe von Nebenströmen vor und nach Extrusion kann dazu beitragen, den Einfluss dieser Prozessierung auf die strukturelle Zusammensetzung zu verstehen. Die wesentlichen Inhaltsstoffe von Nebenströmen wurden teilweise bereits grundlegend charakterisiert, jedoch sind Informationen über ihre Feinstrukturen, insbesondere der Polysaccharide, oft lückenhaft. Weiter fehlen detaillierte Informationen zu den Veränderungen der Strukturen unter dem Einfluss der Extrusion bei unterschiedlichen Extrusionsbedingungen.In der vorliegenden Arbeit wurden Apfeltrester (unbehandelt und enzymatisch behandelt), Kartoffelpülpe sowie Karottentrester hinsichtlich der Ballaststoffgehalte und der chemischen Zusammensetzung und der Strukturen der Ballaststoffpolysaccharide vor und nach Extrusion charakterisiert. Die Ballaststoffe wurden dafür in unlösliche, lösliche und niedermolekularlösliche Fraktionen unterteilt und hinsichtlich ihrer Monosaccharidzusammensetzung nach verschiedenen Säurehydrolysen analysiert. Zudem wurden die Polysaccharidbindungstypen (Methylierungsanalyse), die detaillierten Arabinan‐ und Galactanstrukturen nach enzymatischen Teilabbau, der Veresterungsgrad der polymergebundenen Galacturonsäure sowie die Cellulosekristallinität bestimmt. Weiter wurde die Fermentierbarkeit der Ballaststoffpolysaccharide der Nebenströme vor und nach Extrusion in einem vereinfachten in vitro Modell simuliert und abgeschätzt. Neben den Ballaststoffpolysacchariden lag ein weiterer Fokus auf der Analyse der jeweils charakteristischen sekundären Pflanzenmetaboliten.Da es sich bei Extrusion um einen thermomechanischen Prozess handelt, ist die potentielle Bildung von hitzeinduzierten Kontaminanten ein entscheidender Faktor für den möglichen Einsatz solcher Produkte in Lebensmitteln. Acrylamid und Furfuralderivate wurden dabei exemplarisch analysiert.Die Charakterisierung der ausgewählten Nebenströme zeigte, dass deren Zellwände in Übereinstimmung mit der Taxonomie der Pflanzen überwiegend aus Cellulose sowie Pektinen und variablen, aber generell geringeren Anteilen verschiedener Hemicellulosen bestehen. Hemicellulosen waren dabei überwiegend in Form von Xyloglucanen in den Apfeltrestern vertreten, während in der Kartoffelpülpe und dem Karottentrester Hemicellulosen eine stark untergeordnete Rolle spielen. Die Pektine der Nebenströme wiesen unterschiedliche Anteile an Homogalacturonan und Rhamnogalacturonan Typ I mit verschiedenen neutralen Seitenketten auf. Die dominierenden Seitenketten des Typ I Rhamnogalacturonans waren in den Apfeltrestern Arabinane, im Karottentrester Arabinane und Galactane zu ähnlichen Anteilen sowie Galactane in der Kartoffelpülpe. Als weitere polymere/oligomere NichtPolysaccharid‐Komponenten konnten in den Apfeltrestern kurzkettige zellwandassoziierte Proanthocyanidine nachgewiesen werden.Neben der unterschiedlichen Zellwandzusammensetzung unterschieden sich die Materialien auch in weiteren Inhaltsstoffen. So waren die Gehalte an freien Mono‐ und Disacchariden in den Apfeltrestern vergleichsweise hoch, während die Kartoffelpülpe einen Reststärkegehalt von ca. 30 g/100 g Trockenmasse enthielt. Charakteristische sekundäre Pflanzenmetabolite wie (poly)phenolische Verbindungen waren in den Apfeltrestern und der Kartoffelpülpe (Chlorogensäure) enthalten, daneben waren Carotinoide im Karottentrester vertreten.Durch eine thermomechanische Behandlung mittels Extrusion veränderte sich die Zusammensetzung der Ballaststoffpolysaccharide abhängig von den gewählten Bedingungen. Neben einer Zunahme der Löslichkeit der Ballaststoffpolysaccharide zeigten sich die Pektine als labil unter den angewendeten Bedingungen. Insbesondere wurden Strukturmodifikationen in den neutralen Seitenketten des Typ I Rhamnogalacturonans aller Nebenströme nachgewiesen. Bevorzugt wurden bei den Apfeltrestern hochverzweigte Arabinane abgebaut, während bei der Kartoffelpülpe die Galactane anfällig für Abbaureaktionen waren. Im Karottentrester waren nach Extrusion sowohl unlösliche Arabinane als auch unlösliche Galactane reduziert. Dagegen sind Polysaccharide wie Cellulose und Hemicellulosen weitgehend stabil unter dem Einfluss der Extrusion. Entkopplung der thermischen von der mechanischen Beanspruchung zeigte, dass die Veränderungen überwiegend thermischen Ursprungs sind, der mechanische Einfluss jedoch auch eine Rolle spielen kann.Trotz Veränderungen in den Polysaccharidprofilen der Nebenströme und einer Erhöhung der Löslichkeit der Ballaststoffpolysaccharide, sind die Auswirkungen durch Extrusion auf die Fermentierbarkeit dieser in vitro gering. Der fermentative Abbau der Ballaststoffpolysaccharide, welche mit Driselase durchgeführt wurde, sowie die im Zuge der Fermentation freigesetzten Mono‐ und Oligosaccharide wurden durch Extrusion der Nebenströme nicht grundlegend verändert. Extrusionsbedingte Modifikationen zeigten sich bei den Proanthocyanidinen, bei welchen der Polymerisationsgrad tendenziell abnahm. Hitzeinduzierte Kontaminanten wurden durch Extrusion in Abhängigkeit von den Ausgangsmaterialien nur in geringem Ausmaß gebildet. Freie Mono‐ und Disaccharide sowie Asparagin können dabei Ausgangssubstanzen für die Bildung von Acrylamid sein. Bei Kartoffelpülpe, welche natürlicherweise hohe Gehalte an Asparagin enthält, oder bei dem enzymatisch behandelten Apfeltrester mit hohen Gehalten an freien Mono‐ und Disacchariden wurde Acrylamid unter maximaler thermischer Belastung von 133,5 °C bzw. 128,1 °C mit 71 μg/kg Trockenmasse bzw. 76 μg/kg Trockenmasse nachgewiesen. Auch für 5‐ Hydroxymethylfurfural konnte ein Höchstgehalt von 62,3 mg/kg Trockenmasse für den enzymatisch behandelten Apfeltrester ermittelt werden. Weiter können natürlicherweise vorkommende Substanzen wie Glykoalkaloide in Kartoffeln durch eine mögliche Lockerung der Zellstrukturen besser extrahierbar werden, was zu höheren Gehalten durch Extrusion im Vergleich zum Rohmaterial führte (188,2‐245,9 mg Gesamtglykoalkaloidgehalt/100 g TM). Des Weiteren wurde der Einfluss der Extrusion auch auf sekundäre Pflanzeninhaltsstoffe wie (Poly)Phenole oder Carotinoide deutlich, da deren Anteile reduziert um bis zu 50 % reduziert wurden.Die Charakterisierung der Zellwandzusammensetzung sowie der niedermolekularen Inhaltsstoffe vor und nach thermomechanischer Behandlung mittels Extrusion zeigte, dass die Veränderungen vom eingesetzten Nebenstrom und von den gewählten Extrusionsbedingungen abhängig sind. Die zellwandassoziierten Veränderungen beschränken sich zwar größtenteils auf die neutralen Seitenketten des Typ I Rhamnogalacturonans aus Pektinen, sind aber unterschiedlichen Ausmaßes. Unerwünschte Prozesskontaminanten wie Acrylamid werden nur in geringem Ausmaß gebildet und sollten einer extrusionsbasierten Funktionalisierung von Nebenströmen nicht im Weg stehen, da daneben auch potentiell ernährungsphysiologisch positive sekundäre Pflanzenmetaboliten weitestgehend erhalten bleiben sowie die Fermentierbarkeit der Ballaststoffpolysaccharide bzw. ‐oligosaccharide in vitro kaum verändert wird.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.