The free vibration analysis of rectangular sandwich plates with a flexible core both with and without a uniformly distributed attached mass on the top facesheet is carried out using the finite element method (FEM) through ANSYS parametric design language, which is validated by several literatures through some numerical examples. The model uses the 8-node shell 99 element to model the composite laminates of the top and bottom facesheets of the sandwich plate and 20-node high-order solid 95 element in order to model the flexible PVC core. The validated finite element model is then used to study the parametric effects of geometry such as aspect ratio, length-to-thickness ratio, core thickness-to-plate thickness ratio, the size and the stiffness of the attached mass on the natural frequencies of the sandwich plate as well as the normal and shear stresses. The use of FEM also allows studying the effect of different boundary conditions for both the top and the bottom facesheets of sandwich plates with or without distributed attached mass. Numerical results that hitherto not reported in the literature have been presented in this article. The results presented in this investigation could be useful to acquire a better insight into the behavior of sandwich laminates carrying attached mass for engineering designers of sandwich structures. The results are presented and compared with the latest Numerical results found in literature.
This study investigates stress shielding by predicting bone density around two different implants following total hip arthroplasty using a new thermodynamic-based model for bone remodeling. This model is based on chemical kinetics and irreversible thermodynamics in which bone is treated as a self-organizing system capable of exchanging matter, energy, and entropy with its surroundings. Unlike the previous works in which mechanical loading is regarded as the only stimulus for bone remodeling, this model establishes a coupling between mechanical loading and the chemical reactions involved in the process of bone remodeling. This model is incorporated into the finite element software ANSYS by means of a macro to investigate stress shielding around two different implants: Stryker Omnifit and Exeter periprosthetic hip stems. The results of the simulation showing bone density reductions of 17% in Gruen zone 1 and 27% in Gruen zones 7 around the Omnifit hip stem agree well with dual-energy X-ray absorptiometry (DEXA) measurements reported in the literature. On the other hand, the Exeter implant is found to result in more severe resorption in the proximal femur. This is consistent with clinical studies, which report a higher survivorship rate for HA-coated Omnifit hip stems.
In this article, a new three-dimensional finite element modeling approach with less computing time and space is introduced to study the buckling behavior of sandwich panels, containing a face–core debond. The finite element model presented in this study relates the motion of the face sheets to the core through constraint equations utilizing the concept of slave and master nodes, thus representing a more realistic model of the sandwich panel. The composite face sheets are modeled with shell elements, and the core is modeled using the 3D structural solid elements capable of taking transverse flexibility into consideration. In order to model the debond, the constraints between the nodes of the face sheet and the core are removed and replaced with contact elements in the debonded region to avoid interpenetration. The model is validated through comparison with experimental results reported in the literature. The validated model is then used to study the effects of the size, shape, aspect ratio of the debond, as well as fiber orientation of the face sheets and the influence of core stiffness on the buckling load of the panel subject to different boundary conditions on the top and bottom face sheets of the panel.
A micromechanical approach is adopted to study the role of viscoelasticity on the fatigue behavior of polymer matrix composites. In particular, the study examines the interaction of fatigue and creep in angle ply carbon/epoxy at 25 and 114°C. The matrix phase is modeled as a vicoelastic material using Schapery's single integral constitutive equation. Taking viscoelsticity into account allows the study of creep strain evolution during the fatigue loading. The fatigue failure criterion is expressed in terms of the fatigue failure functions of the constituent materials. The micromechanical model is also used to calculate these fatigue failure functions from the knowledge of the S-N diagrams of the composite material in longitudinal, transverse and shear loadings thus eliminating the need for any further experimentation. Unlike the previous works, the present study can distinguish between the strain evolution due to fatigue and creep. The results can clearly show the contribution made by the effect of viscoelasticity to the total strain evolution during the fatigue life of the specimen. Although the effect of viscoelsticity is found to increase with temperature, its contribution to strain development during fatigue is compromised by the shorter life of the specimen when compared to lower temperatures.
In the present study, an off-lattice particle-based method called the reactive multi-particle collision (RMPC) dynamics is extended to model reaction-diffusion systems with reactive boundary conditions in which the a priori diffusion coefficient of the particles needs to be maintained throughout the simulation. To this end, the authors have made use of the so-called bath particles whose purpose is only to ensure proper diffusion of the main particles in the system. In order to model partial adsorption by a reactive boundary in the RMPC, the probability of a particle being adsorbed, once it hits the boundary, is calculated by drawing an analogy between the RMPC and Brownian Dynamics. The main advantages of the RMPC compared to other molecular based methods are less computational cost as well as conservation of mass, energy and momentum in the collision and free streaming steps. The proposed approach is tested on three reaction-diffusion systems and very good agreement with the solutions to their corresponding partial differential equations is observed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.