No abstract

Effective removal of oils from water is of global significance for environmental protection. In this study, we investigate the hydrophobicity and oleophilicity of open-cell polymer foams prepared in a continuous and scalable extrusion process. The material used to prepare the open-cell foams is a fibrillar blend of polypropylene (PP) and polytetrafluoroethylene (PTFE). Scanning electron microscopy (SEM) images of the morphology of the PP/PTFE fibrillar blend reveal that the PTFE has a fibrillar morphology in the PP matrix. SEM micrograph of the extruded foam shows the formation of an interconnected open-cell structure. Using nitrogen pycnometry, the open-cell content is estimated to be 97.7%. A typical bulk density of the open-cell foam is measured to be about 0.07 g cm(-3) corresponding to a void fraction of 92%. Thus, a large three-dimensional space is made available for oil storage. A drop of water on the cross-section of the extruded open-cell foam forms a contact angle of 160° suggesting that the open-cell foam exhibits superhydrophobicity. The open-cell foam can selectively absorb various petroleum products, such as octane, gasoline, diesel, kerosene, light crude oil, and heavy crude oil from water and the uptake capacities range from about 5 to 24 g g(-1). The uptake kinetics can be enhanced by exposing the open-cell foam to high intensity ultrasound which increases the surface porosity of the thin, impervious, foam "skin" layer. The reusability of the foam can be improved by using a matrix polymer which demonstrates superior elastic properties and prevents the foams from undergoing a large permanent deformation upon compression to "squeeze out" the oil. For example, when the PP homopolymer matrix is replaced with a PP random copolymer, the permanent deformation for 10 compressive cycles is reduced from about 30% to 10%. To the best of our knowledge, these PP-based open-cell foams outperform PP-based absorbents conventionally used for oil-spill cleanup applications such as nonwoven PP fibers or melt-blown PP pads.

No abstract

No abstract

No abstract