Streszczenie Biomasa stanowi obecnie jedno z podstawowych źródeł energii odnawialnej w energetyce zawodowej w Polsce. Wykorzystanie tego paliwa wynika z obowiązującej Polityki Energetycznej Polski do 2030, która narzuca wzrost udziału odnawialnych źródeł energii w finalnym zużyciu energii co najmniej do poziomu 15% w 2020 roku, a następnie dalszy wzrost w latach następnych. Projekt Polityki energetycznej Polski do 2050 roku zakłada zwiększenie do 20% udziału energii odnawialnej we wszystkich źródłach zużywanej energii. Biomasa może być stosowana jako samodzielne paliwo lub może być współspalana z węglem. Każde paliwo stałe, również biomasa, w energetyce zawodowej powoduje powstawanie odpadów energetycznych. W przypadku każdego odpadu powinna być zachowana hierarchia sposobów postępowania z nimi zdefiniowana w Ustawie o odpadach. Odpady energetyczne są szeroko wykorzystywane w górnictwie, produkcji materiałów budowlanych i drogownictwie. Również dla ubocznych produktów spalania biomasy są to kierunki, które powinny być rozpatrywane w pierwszej kolejności ze względu na długoletnie doświadczenia w ich wykorzystaniu. Przykładowo, popioły lotne ze współspalania są dopuszczone przez normę PN-EN 450:1 − Popiół lotny do betonu. Popioły lotne ze spalania biomasy różnią się, pomimo wielu podobieństw, od popiołów ze spalania węgla czy współspalania. Popioły te mogą charakteryzować się wysoką wymywalnością zanieczyszczeń i przez to ich gospodarcze wykorzystanie może być ograniczone. W artykule przedstawiono wyniki badań wymywalności zanieczyszczeń z suchych popiołów lotnych i ich wodnych zawiesin. Dla porównania wykonano oznaczenie wymywalności zanieczyszczeń z popiołów ze spalania węgla w kotłach konwencjonalnych i kotłach fluidalnych. Badane popioły ze spalania biomasy charakteryzowały się wysoką wymywalnością siarczanów, chlorków, chromu i potasu. Ponieważ górnictwo podziemne pozostaje jednym z podstawowych kierunków wykorzystania popiołów lotnych, uzyskane wyniki badań porównano z wymaganiami normy PN-G-11011 − Materiały do podsadzki zestalanej i doszczelniania zrobów zawałowych. Wymagania i badania.
Biomasa jest jednym z najważniejszych źródeł pozyskiwania energii odnawialnej w energetyce. na całym świecie prowadzone są badania, mające na celu efektywne i ekonomicznie opłacalne zwiększenie wykorzystania biomasy do produkcji energii (Vassilev i in. 2010(Vassilev i in. , 2013c. spalanie biomasy, tak jak paliw konwencjonalnych, powoduje powstawanie stałych ubocznych produktów. szacuje się, że około 480 milionów ton popiołu ze spalania i współspalania biomasy może zostać wygenerowane na całym świecie co roku, przy założeniu, że ilość spalanej biomasy wnosi 7 miliardów ton/rok (Vassilev i in. 2010(Vassilev i in. , 2012(Vassilev i in. , 2013c. wpływ na wykorzystanie odpadów ze spalania i współspalania biomasy mają ich właściwości fizykochemiczne, które z kolei zależą przede wszystkim od rodzaju biomasy oraz technologii spalania. wszystkie te czynniki sprawiają, że odpady powstałe po spaleniu biomasy posiadają bardzo różnorodne i zmienne właściwości. znaczną część tych odpadów stanowią popioły lotne, których zmienne składy chemiczne i fazowe czynią je trudnymi do zagospodarowania (rajamma i in. 2009).zgodnie z hierarchią metod postępowania z odpadami, jeżeli nie da się zapobiec ich powstaniu, należy je poddać recyklingowi albo innemu rodzajowi odzysku. Popioły ze spalania biomasy (10 01 03) oraz współspalania biomasy (10 01 17) są wykorzystywane gospodarczo. Problem stanowią popioły fluidalne ze spalania biomasy zaliczane do odpadów 10 01 82, które nie są poddawane odzyskowi (emitor 2014; Uliasz-Bocheńczyk i in. 2015a).
Summary As a result of energy production processes, the power industry is the largest source of CO2 emissions in Poland. Emissions from the energy sector accounted for 52.37% (162 689.57 kt) of the total emissions in 2015, which was estimated at 310.64 million tons of CO2. In recent years, the tightening of regulations on the use of renewable energy sources has resulted in an increased amount of biomass used in the professional energy industry. This is due to the fact that the CO2 emissions from biomass combustion are not included in the total emissions from the combustion of fuels, resulting in the zero- emission factor for biomass. At the same time, according to the hierarchy of waste management methods, recycling is the preferred option for the management of by-products generated during energy production. The fly ashes resulting from the biomass combustion in pulverized boilers (which, due to their chemical composition, can be classified as silicate ash) were subjected to analysis. These ashes can be classified as waste 10 01 17 - fly ash from co-firing other than mentioned in 10 01 16 according to the Regulation of the Minister of the Environment of December 9, 2014 on waste catalogues. The maximum theoretical carbon dioxide binding capacity for the analyzed fly ashes resulting from the co-combustion of biomass is 8.03%. The phase composition analysis of the fly ashes subjected to carbonation process has shown, in addition to the components identified in pure fly ash samples (SiO2, mullite), the presence of calcium carbonate − calcite − the primary product of the carbonation process, as indicated by the results of both X-ray and thermogravimetric analysis.The degree of carbonation has been determined based on the analysis of the results of the phase composition of fly ash resulting from the co-firing of biomass and bituminous coal. The calculated degree of carbonation amounted to 1.51%. The carbonation process is also confirmed by the lowered pH of the water extracts, decreasing from 11.96 for pure ashes to 8.7 for CO2 treated fly ashes. In addition, the carbonation process has reduced the leaching of pollutants, most notably chlorides, sulphates, and potassium.
Abstract. The most commonly used renewable energy source in Polish energy production companies is solid biomass which is used both as a separate fuel or as a component co-incinerated together with (mostly) hard coal. During its incineration the biomass generates by-products with diverse and variable physicochemical properties. The most of the waste from production of electricity and/or heat are fly ashes. The fly ashes from combustion of biomass are a particular kind of waste distinguished by high level of leaching of contaminants and variable chemical composition. The by-products from combustion can only be used in production when their physicochemical properties meet specific parameters. This article presents results of research on leachability of chemical pollutants from dry ashes of combustion or co-combustion of biomass. The study of the impact of grinding of ashes on the level of their leachability was also conducted. Ashes from combustion of biomass as well as their mixture with fluidized ash from combustion of charcoal were submitted to grinding process. Afterwards level of leachability was measured on them to determine prospect of utility in mining technologies.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.