Heavily Er-doped fibers (EDFs) based on P(2)O(5)-Al(2)O(3)-SiO(2) (PAS) ternary glass have been studied. A unique feature of this glass is the formation of a AlPO(4) join having a structure similar to that of SiO(2) glass and a refractive index below it. It is found that the Er(3+) absorption and emission spectra in the PAS EDFs are defined by the dopant (Al(2)O(3) or P(2)O(5)) present in excess and are close to those of the corresponding binary glass (Al(2)O(3)-SiO(2) or P(2)O(5)-SiO(2)). The presence of the AlPO(4) join results in the enhancement of the pump-to-signal conversion efficiency in the PAS EDFs as compared with the EDFs based on the P(2)O(5)-SiO(2) and Al(2)O(3)-SiO(2) (with 1.5 mol. %Al(2)O(3) and less) binary glasses. The PAS host glass is advantageous in the case of large-mode-area active fibers.

An original architecture of an active fiber allowing a nearly diffraction-limited beam to be produced is demonstrated. The active medium is a double-clad large-mode-area photonic-bandgap fiber consisting of a 10,000 ppm by weight Yb(3+)-doped core surrounded by an alternation of high- and low-index layers constituting a cylindrical photonic crystal. The periodic cladding allows the robust propagation of a approximately 200 microm(2) fundamental mode and efficiently discriminates against the high-order modes. The M(2) parameter was measured to be 1.17. A high-power cw laser was built exhibiting 80% slope efficiency above threshold. The robust propagation allows the fiber to be tightly bent. Weak incidence on the slope efficiency was observed with wounding radii as small as 6 cm.

We report, for the first time to our knowledge, on a single-mode millijoule-level 100-nanosecond Er-doped fiber laser operating near 1550 nm. The system features a newly developed 35-μm-core Yb-free double-clad Er-doped fiber based on P(2)O(5)-Al(2)O(3)-SiO(2) glass matrix and produces pulses with energy as high as 1 mJ at repetition rates of 1-10 kHz.

No abstract

No abstract