Рассматривается проблема адсорбционной очистки сточных вод промышленных предприятий. В качестве сорбционных материалов предлагаются глинистые материалы -бентониты, модифицированные включением в их структуру углеродных нанотрубок и глицерина. Изучение сорбционных материалов на основе модифицированного бентонита направлено на установление таких модификаций бентонита, которые позволили бы обеспечить максимально возможное извлечение из загрязненных производственных сточных вод нитро-и аминосоединений. Методы и материалы. Исследования сорбционной активности бентонитов проводились на модельных растворах о-фенилендиамина и п-динитробензола. Изучены возможные кислотная (HCl) и солевая (CaCl 2 ) активации модифицированного бентонита. Концентрации о-фенилендиамина и п-динитробензола в фильтрате определялись методом фотометрического анализа. Статистическая обработка результатов экспериментов проводилась с помощью пакета программ Statistica for Windows 6.0. Результаты. Установлено, что наилучшей сорбционной способностью в статических условиях по отношению к п-динитробензолу обладает бентонит, модифицированный углеродными нанотрубками после активации этого сорбента 9 %-ным раствором HCl и 30 %-ным раствором CaCl 2 , а лучшей сорбционной способностью по отношению к о-фенилендиамину обладает бентонит, модифицированный углеродными нанотрубками, но после активации этого сорбента 18 %-ным раствором HCl и 38 %-ным раствором CaCl 2 . Величина адсорбции о-фенилендиамина бентонитом, модифицированным углеродными нанотрубками, значительно выше, чем сорбция п-динитробензола: Г ∞ = 66,9 мг/г против Г ∞ = 2,41 мг/г. Подобная картина наблюдается и при сравнении значений адсорбции бентонитом, модифицированным глицерином, однако здесь разница в значениях чуть меньше: Г ∞ = 64,8 мг/г против Г ∞ = 1,95 мг/г. Рекомендовано назначать параметры адсорбционных фильтров цилиндрической формы в составе станций очистки сточных вод от нитро-и аминосоединений исходя из соотношения высоты к диаметру адсорбционной колонны, равного H/D = 1,4. Ключевые слова: адсорбция, модифицированный бентонит, глицерин, углеродные нанотрубки, о-фенилендиамин, п-динитробензол, эффективность водоочистки.
An actual trend in applied ecology is the development and implementation of innovative environmental protection technologies. Modern methods for extracting heavy metal ions from industrial wastewater are quite diverse. The purpose of the study was to develop and justify new technologies for purification of aqueous media, including adsorption purification, from heavy metal ions (by the example of Ni2+ and Cd2+ ions). Laboratory studies have established that the degree of adsorption extraction of Ni2+ ions by the sorption material from bentonite modified with carbon nanotubes and fired at a temperature of 550 °C increases by 13-14% due to its activation with 18% HCl solution and 38% CaCl2 solution, and the degree of adsorption extraction of Cd2+ ions with this activation of the sorbent, it increases by 16-17%. A technological scheme of a water purification station is proposed, which includes highly efficient adsorption filters with sorption material from bentonite of the specified modification and acid-salt activation.
Flocculation using polyacrylamides is one of the most promising methods of industrial wastewater treatment. The aim of our research was to estimate the efficiency of the use of new types of polyacrylamide-based flocculants for industrial wastewater treatment. The objects of the study were the wastewaters of the enterprise LLC “Saratov Chemical Plant of Acrylic Polymers “ACRYPOL” and several flocculants (water-soluble polymers) obtained on the basis of acrylamide, acrylic acid and chitosan. It was established that the optimal dose of nonionic flocculant H600™ was 5 mg/dm3. Industrial wastewater treatment efficiency was studied on two samples of weakly cationic flocculants (215-2 and 233-2) synthesized in a laboratory way, as well as on a sample of nonionic flocculant H600™. It was found that the tested flocculants had no significant effect on the pH value and the content of sulfate ions in water. Flocculant 233-2 with the highest chitosan content was the best in terms of chemical oxygen demand, dry residue and the amount of suspended solids. Flocculant 215-2 with the lowest chitosan content had a slightly worse performance. The worst of the tested flocculants was the nonionic H600™, which does not contain chitosan.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.