Additive manufacturing (AM) is an alternative metal fabrication technology. The outstanding advantage of AM (3Dprinting, direct manufacturing), is the ability to form shapes that cannot be formed with any other traditional technology. 3D-printing began as a new method of prototyping in plastics. Nowadays, AM in metals allows to realize not only netshape geometry, but also high fatigue strength and corrosion resistant parts. This success of AM in metals enables new applications of the technology in important fields, such as production of medical implants. The 3D-printing of medical implants is an extremely rapidly developing application. The success of this development lies in the fact that patientspecific implants can promote patient recovery, as often it is the only alternative to amputation. The production of AM implants provides a relatively fast and effective solution for complex surgical cases. However, there are still numerous challenging open issues in medical 3D-printing. The goal of the current research review is to explain the whole technological and design chain of bio-medical bone implant production from the computed tomography that is performed by the surgeon, to conversion to a computer aided drawing file, to production of implants, including the necessary post-processing procedures and certification. The current work presents examples that were produced by joint work of Polygon Medical Engineering, Russia and by TechMed, the AM Center of Israel Institute of Metals. Polygon provided 3D-planning and 3Dmodelling specifically for the implants production. TechMed were in charge of the optimization of models and they manufactured the implants by Electron-Beam Melting (EBM Ò), using an Arcam EBM Ò A2X machine. Keywords Additive manufacturing Á Bio-medical implants Á Electron beam melting Á 3D-printing Á Ti-6Al-4V Á CAD design Á Computed tomography

The paper outlines the achievements and challenges in the additive manufacturing (AM) application to veterinary practice. The state-of-the-art in AM application to the veterinary surgery is presented, with the focus of AM for patient-specific implants manufacturing. It also provides critical discussion on some of the potential issues design and technology should overcome for wider and more effective implementation of additively manufactured parts in veterinary practices. Most of the discussions in present paper are related to the metallic implants, manufactured in this case using so-called powder bed additive manufacturing (PB-AM) in titanium alloy Ti-6AL-4V, and to the corresponding process of their design, manufacturing and implementation in veterinary surgery. Procedures of the implant design and individualization for veterinary surgery are illustrated basing on the four performed surgery cases with dog patients. Results of the replacement surgery in dogs indicate that individualized additively manufactured metallic implants significantly increase chances for successful recovery process, and AM techniques present a viable alternative to amputation in a large number of veterinary cases. The same time overcoming challenges of implant individualization in veterinary practice significantly contributes to the knowledge directly relevant to the modern medical practice. An experience from veterinary cases where organ-preserving surgery with 3D-printed patientspecific implants is performed provides a unique opportunity for future development of better human implants.

No abstract

prototypes comprising ultrathin AZ31 Mg alloy anodes ( � 25 μm thick) and Mg x Mo 6 S 8 Chevrel-phase cathodes exhibited cycling performance equal to that of similar cells containing thicker pure Mg foil anodes. The possibility of using ultrathin processable Mg metal anodes is an important step in the realization of rechargeable Mg batteries.

The current paper is devoted to classification of powder-bed additive manufacturing (PB-AM) techniques and description of specific features, advantages and limitation of different PB-AM techniques in aerospace applications. The common principle of “powder-bed” means that the used feedstock material is a powder, which forms “bed-like” platform of homogeneous layer that is fused according to cross-section of the manufactured object. After that, a new powder layer is distributed with the same thickness and the “printing” process continues. This approach is used in selective laser sintering/melting process, electron beam melting, and binder jetting printing. Additionally, relevant issues related to powder raw materials (metals, ceramics, multi-material composites, etc.) and their impact on the properties of as-manufactured components are discussed. Special attention is paid to discussion on additive manufacturing (AM) of aerospace critical parts made of Titanium alloys, Nickel-based superalloys, metal matrix composites (MMCs), ceramic matrix composites (CMCs) and high entropy alloys. Additional discussion is related to the quality control of the PB-AM materials, and to the prospects of new approaches in material development for PB-AM aiming at aerospace applications.