ZnO@ZnS nanorod-array coated titanium: Good to fibroblasts but bad to bacteria

Antibacterial Effects of Modified Implant Abutment Surfaces for the Prevention of Peri-Implantitis—A Systematic Review

“…Besides the antibacterial effect itself, the antibacterial effect over a longer period of time, i.e., years of clinical use, should also be evaluated. In addition to the surface modification of implant abutments described above, the use of bioactive ions such as Zn 2+ appear to be promising [ 63 , 64 , 65 , 66 , 67 ]. Their impact on bacterial growth in the field of implant dentistry should be investigated using antibacterial modified closure screws, healing caps and restorative components as implant abutments or crown material.…”

Antibacterial Effects of Modified Implant Abutment Surfaces for the Prevention of Peri-Implantitis—A Systematic Review

“…Besides the antibacterial effect itself, the antibacterial effect over a longer period of time, i.e., years of clinical use, should also be evaluated. In addition to the surface modification of implant abutments described above, the use of bioactive ions such as Zn 2+ appear to be promising [ 63 , 64 , 65 , 66 , 67 ]. Their impact on bacterial growth in the field of implant dentistry should be investigated using antibacterial modified closure screws, healing caps and restorative components as implant abutments or crown material.…”

Balancing the Anti‐Bacterial and Pro‐Osteogenic Properties of Ti‐Based Implants by Partial Conversion of ZnO Nanorods into Hybrid Zinc Phosphate Nanostructures

“…The ZnO nanorod arrays were synthesized on the pristine Ti by a hydrothermal method. [ 29 ] Briefly, 0.05 m zinc acetate dihydrate (Zn(CH 3 COO) 2 ·2H 2 O) and 0.05 m ethanolamine (C 2 H 7 NO) were dissolved in ethanol and stirred for 5 h at room temperature. Then, 60 µL of the mixture was spin‐coated onto the pristine Ti at a speed of 4000 revolutions per min (rpm) for 20 s followed by sintering in an oven at 120 °C for 10 min.…”

Surface modification of titanium substrate via combining photothermal therapy and quorum-sensing-inhibition strategy for improving osseointegration and treating biofilm-associated bacterial infection

“…The changes of ATP concentration of the co-incubated bacteria in each group of materials were assessed to reflect the level of cell metabolism [ 13 ]. Typically, the 1 × 10 6 CFU/mL bacterial suspension was incubated with different substrates for 6 h. After laser radiation, the enhanced ATP detection kit (Beyotime) was used to detect the luminous intensities with Fluorescence spectrophotometer (RF-6000, Daojing, Japan).…”

“…The specific primer sequences used in this study were listed in Table S1 . Through normalization analysis with the reference β-actin, the expression levels of the osteogenic related genes runt-related transcription factor 2 (Runx2), alkaline phosphatase (ALP), type I collagen (Col I), osteocalcin (OCN), and Osteoprotegerin (OPG) were detected [ 13 , 18 ].…”

Antibacterial Effects of Modified Implant Abutment Surfaces for the Prevention of Peri-Implantitis—A Systematic Review

“…Besides the antibacterial effect itself, the antibacterial effect over a longer period of time, i.e., years of clinical use, should also be evaluated. In addition to the surface modification of implant abutments described above, the use of bioactive ions such as Zn 2+ appear to be promising [ 63 , 64 , 65 , 66 , 67 ]. Their impact on bacterial growth in the field of implant dentistry should be investigated using antibacterial modified closure screws, healing caps and restorative components as implant abutments or crown material.…”

Balancing the Anti‐Bacterial and Pro‐Osteogenic Properties of Ti‐Based Implants by Partial Conversion of ZnO Nanorods into Hybrid Zinc Phosphate Nanostructures

“…The ZnO nanorod arrays were synthesized on the pristine Ti by a hydrothermal method. [ 29 ] Briefly, 0.05 m zinc acetate dihydrate (Zn(CH 3 COO) 2 ·2H 2 O) and 0.05 m ethanolamine (C 2 H 7 NO) were dissolved in ethanol and stirred for 5 h at room temperature. Then, 60 µL of the mixture was spin‐coated onto the pristine Ti at a speed of 4000 revolutions per min (rpm) for 20 s followed by sintering in an oven at 120 °C for 10 min.…”

Surface modification of titanium substrate via combining photothermal therapy and quorum-sensing-inhibition strategy for improving osseointegration and treating biofilm-associated bacterial infection

“…The changes of ATP concentration of the co-incubated bacteria in each group of materials were assessed to reflect the level of cell metabolism [ 13 ]. Typically, the 1 × 10 6 CFU/mL bacterial suspension was incubated with different substrates for 6 h. After laser radiation, the enhanced ATP detection kit (Beyotime) was used to detect the luminous intensities with Fluorescence spectrophotometer (RF-6000, Daojing, Japan).…”

“…The specific primer sequences used in this study were listed in Table S1 . Through normalization analysis with the reference β-actin, the expression levels of the osteogenic related genes runt-related transcription factor 2 (Runx2), alkaline phosphatase (ALP), type I collagen (Col I), osteocalcin (OCN), and Osteoprotegerin (OPG) were detected [ 13 , 18 ].…”

Antibacterial Effects of Modified Implant Abutment Surfaces for the Prevention of Peri-Implantitis—A Systematic Review

“…Besides the antibacterial effect itself, the antibacterial effect over a longer period of time, i.e., years of clinical use, should also be evaluated. In addition to the surface modification of implant abutments described above, the use of bioactive ions such as Zn 2+ appear to be promising [ 63 , 64 , 65 , 66 , 67 ]. Their impact on bacterial growth in the field of implant dentistry should be investigated using antibacterial modified closure screws, healing caps and restorative components as implant abutments or crown material.…”

Balancing the Anti‐Bacterial and Pro‐Osteogenic Properties of Ti‐Based Implants by Partial Conversion of ZnO Nanorods into Hybrid Zinc Phosphate Nanostructures

“…The ZnO nanorod arrays were synthesized on the pristine Ti by a hydrothermal method. [ 29 ] Briefly, 0.05 m zinc acetate dihydrate (Zn(CH 3 COO) 2 ·2H 2 O) and 0.05 m ethanolamine (C 2 H 7 NO) were dissolved in ethanol and stirred for 5 h at room temperature. Then, 60 µL of the mixture was spin‐coated onto the pristine Ti at a speed of 4000 revolutions per min (rpm) for 20 s followed by sintering in an oven at 120 °C for 10 min.…”

Surface modification of titanium substrate via combining photothermal therapy and quorum-sensing-inhibition strategy for improving osseointegration and treating biofilm-associated bacterial infection

“…The changes of ATP concentration of the co-incubated bacteria in each group of materials were assessed to reflect the level of cell metabolism [ 13 ]. Typically, the 1 × 10 6 CFU/mL bacterial suspension was incubated with different substrates for 6 h. After laser radiation, the enhanced ATP detection kit (Beyotime) was used to detect the luminous intensities with Fluorescence spectrophotometer (RF-6000, Daojing, Japan).…”

“…The specific primer sequences used in this study were listed in Table S1 . Through normalization analysis with the reference β-actin, the expression levels of the osteogenic related genes runt-related transcription factor 2 (Runx2), alkaline phosphatase (ALP), type I collagen (Col I), osteocalcin (OCN), and Osteoprotegerin (OPG) were detected [ 13 , 18 ].…”