Оптимізація Вимірювальних Засобів Напружено-Деформованого Стану За Допомогою Тензодатчиків

Abstract

In the article, the principles of construction, design and mathematical modeling of deformation and stresses of complex technical constructions are developed with the help of strain gauges and strain gauges taking into account destabilizing factors, which allows to significantly reduce the level of errors in relation to existing measurement methods and known analogs.The method of digital compensation provides a more significant reduction in the errors of measuring transducers compared with the method of analog compensation. Features and technical indicators of this method are considered on an example of measuring pressure transducer with foil strain gauges.This method is universal, allows us to adjust not only the errors of the measurement channel nonlinearity and additional errors but also the errors associated with the effect of interferences of the general type due to ground resistance, which induces the connection between the measuring channels of the main and destabilizing factor.The disadvantages of this method include a significant amount of computations, which sharply increases with increasing order of approximating polynomials.The purpose is to develop a method and means of measuring stress-strain state using strain gauge, free from the above - mentioned shortcomings.The main destabilizing factors that limit the measurement accuracy using strain gauge are:- random processes (noises, obstacles, etc.);- changes in parameters of measuring transducers due to aging and physical degradation;- effects of external climatic and mechanical factors (temperature, humidity, etc.).The influence of the main destabilizing factors limiting the accuracy of the measurement of the stress-strain state of complex technical constructions with the help of strain gauges was analyzed, among which the influences of external climatic and mechanical factors are one of the most important ones. Regarding the systematic components, the most important in statistical measurements are the errors of nonlinearity and the temperature component of the error.For the study, two main alloys were taken, which today has the widest use as a material for strain gauges - it is constantan and karma. For these materials, the influence of the range of temperature changes, the spread of the values of temperature error on the mean-square value of the error of approximation by power polynomials was investigated.Using the NUMERY package, the dependence of the approximation error on the order of the approximating polyphony was determined. It is established that the mean square error value in the wide temperature range for both constantan and karma has a weak correlation with the order of a polynomial.