Understanding the Effect of the Dianhydride Structure on the Properties of Semiaromatic Polyimides Containing a Biobased Fatty Diamine

Abstract

In this work we report the effect of the hard block dianhydride structure on the overall properties of partially biobased semiaromatic polyimides. For the study, four polyimides were synthesized using aliphatic fatty dimer diamine (DD1) as the soft block and four different commercially available aromatic dianhydrides as the hard block: 4,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (BPADA), 4,4′-oxidiphthalic anhydride (ODPA), 4,4′-(Hexafluoroisopropylidene) diphthalic anhydride (6FDA), and 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA). The polymers synthesized were fully organo-soluble thermoplastic branched polyimides with glass transition temperatures close to room temperature. The detailed analysis took into account several aspects of the dianhydrides structure (planarity, rigidity, bridging group between the phtalimides, and electronic properties) and related them to the results obtained by differential scanning calorimetry, rheology, fluorescence and broadband dielectric spectroscopy. Moreover, the effects of physical parameters (crystallization and electronic interactions) on the relaxation behavior are discussed. Despite the presence of the bulky branched soft block given by the dimer diamine, all polyimides showed intermolecular charge transfer complexes, whose extent depends on the electronic properties of the dianhydride hard block. Furthermore, the results showed that polyimides containing flexible and bulky hard blocks turned out fully amorphous while the more rigid dianhydride (BPDA) led to a nanophase separated morphology with low degree of crystallinity resulting in constrained segmental relaxation with high effect on its mechanical response with the annealing time. This work represents the first detailed report on the development and characterization of polyimides based on a biobased fatty dimer diamine. The results highlight the potential of polymer property design by controlled engineering of the aromatic dianhydride blocks.

Giving a Second Opportunity to Tire Waste: An Alternative Path for the Development of Sustainable Self-Healing Styrene–Butadiene Rubber Compounds Overcoming the Magic Triangle of Tires

“…The phenomenological model of Schönhals and Schlosser [49] proposes that the shape of the dielectric loss peak is related to the behavior of the polymer at low and high frequencies, controlled by inter-and intra-molecular interactions, respectively. The application of such a model to the studied SBR suggests that the variations on the high-frequency side in the healed sample can be attributed to new entanglements that are formed thanks to local chain mobility/diffusion favored by the thermal healing treatment [23,50]. This means chain segments with different dynamics and thus a higher degree of structural heterogeneity, implying regions of distinct mobility.…”

Reduced Coefficients of Linear Thermal Expansion of Colorless and Transparent Semi-Alicyclic Polyimide Films via Incorporation of Rigid-Rod Amide Moiety: Preparation and Properties

“…Based on the previous decades of research on the origination of coloration in traditional all-aromatic PI films, the researchers revealed many effective procedures to prohibit the formation of intra-or intermolecular charge transfer complexes (CTC) between the electron-donating diamine moiety and the electron-accepting dianhydride moiety so as to improve the optical transparency of the PI films [11][12][13]. At present, the effective means to develop CPI films mainly include introducing groups with high electronegativity characteristics, such as trifluoromethyl groups, sulphone groups, or substituents with non-conjugated characteristics, such as aliphatic or alicyclic groups, or groups with large molar volume-such as naphthalene, fluorene, or cardo groups-into the PI molecular chains [14][15][16][17][18][19][20]. Although various CPI films have been developed in the literature by these methodologies, much of them still cannot be practically used due to the absence of dimensional stability at elevated temperatures.…”

Toughened and hydrophobically modified polyamide 11 copolymers with dimer acids derived from waste vegetable oil

“…Therefore, decreasing trend of the T g values with increasing DA content obtained from the DSC and DMA is in good agreement. In addition, the shape of tan δ peaks was maintained narrow and unimodal, indicating excellent homogeneity of copolymers …”