Transient response improvement of half‐bridge LLC resonant converter with full‐bridge rectifier for DC microgrid

Abstract

LLC resonant converter has the features of low noise, high efficiency and power density, which is suitable to be integrated into DC microgrid. Due to severe stresses in the resonant tank, achieving fast and safe transient performance has been challenging for resonant converters. With less switch number and voltage stress, half‐bridge LLC resonant converter with full‐bridge rectifier (H‐F LLC resonant converter) are more suitable for high‐voltage application. To improve the transient response of the converter, this paper proposes a method based fixed center state trajectory for the converter to achieve soft start‐up. To reduce dynamic response time during start‐up, each step of fixed center state‐trajectory is designed optimally for the shortest path with symmetrical current limitation. In addition, the proposed method is also applicable to full‐bridge LLC converters. Moreover, according to the state‐plane analysis, load stepping‐up and stepping‐down transient state trajectories with the shortest path are carried out as well. To minimize the adverse effect of digital delay, fast load transient control based on 3D look‐up table is given based on FPGA‐EP3C25E144I7, which would also significantly reduce the computation requirement of the hardware controllers. The experimental results are verified on a 380V/12V LLC converter prototype at 130 kHz.

Control of DMC-Based LLC Resonant Converters

“…Integrating Eqs. ( 7), (8), and ( 9), the formulation for the control increment matrix ∆U M (k) is obtained:…”

“…At the same time, the circuit has smaller electromagnetic interference and stronger electromagnetic compatibility ability [4][5][6]. The converter's advantages enable it to be widely used in communication and aviation power supplies, power adapters, energy routers and other fields [7,8].…”