Toxicological implications of released particulate matter during thermal decomposition of nano-enabled thermoplastics

Abstract

Nano-enabled thermoplastics are part of the growing market of nano-enabled products (NEPs) that have vast utility in several industries and consumer goods. The use and disposal of NEPs at their end of life has raised concerns about the potential release of constituent engineered nanomaterials (ENMs) during thermal decomposition and their impact on environmental health and safety. To investigate this issue, industrially relevant nano-enabled thermoplastics including polyurethane, polycarbonate, and polypropylene containing carbon nanotubes (0.1 and 3% w/v, respectively), polyethylene containing nanoscale iron oxide (5% w/v), and ethylene vinyl acetate containing nanoscale titania (2 and 5% w/v) along with their pure thermoplastic matrices were thermally decomposed using the recently developed lab based Integrated Exposure Generation System (INEXS). The life cycle released particulate matter (called LCPM) was monitored using real time instrumentation, size fractionated, sampled, extracted and prepared for toxicological analysis using primary small airway epithelial cells to assess potential toxicological effects. Various cellular assays were used to assess reactive oxygen species and total glutathione as measurements of oxidative stress along with mitochondrial function, cellular viability, and DNA damage. By comparing toxicological profiles of LCPM released from polymer only (control) with nano-enabled LCPM, potential nanofiller effects due to the use of ENMs were determined. We observed associations between NEP properties such as the percent nanofiller loading, host matrix, and nanofiller chemical composition and the physico-chemical properties of released LCPM, which were linked to biological outcomes. More specifically, an increase in percent nanofiller loading promoted a toxicological response independent of increasing LCPM dose. Importantly, differences in host matrix and nanofiller composition were shown to enhance biological activity and toxicity of LCPM. This work highlights the importance of assessing the toxicological properties of LCPM and raises environmental health and safety concerns of nano-enabled products at their end of life during thermal decomposition/incineration.

Nanoparticle exposures from nano-enabled toner-based printing equipment and human health: state of science and future research needs

“…With large-scale commercialization of nanotechnology and widespread market penetration of nano-enabled products, new mixed incidental and engineered nanoparticle exposure scenarios have emerged at various stages of a product life cycle, from the production of raw materials to end-of life recycling and disposal (Pal, Watson, et al 2015, Sotiriou et al 2016, Sotiriou et al 2015). Addition of ENM in this mix creates new technical and conceptual challenges related to assessing the chemical and toxicological properties of emissions, untangling the role of ENM form that of incidental nanoparticles, and eventually assessing the risk (Watson-Wright et al 2017). …”

Environmental Impacts by Fragments Released from Nanoenabled Products: A Multiassay, Multimaterial Exploration by the SUN Approach

“…Other alternatives, as cells in suspension instead of attached to the bottom of the plates or an inverted culture should be tested in future to enhance the sensitivity of the assay, as demonstrated for PP-based incineration-FPs. 41,42 On ammonia oxidizing bacteria, the reference products and the pristine nanomaterials Fe 2 O 3 Red 101, Organic Pigment Red 254, and CNT showed no effects at test initiation and after 28 days. A comparable result was found for the fragmented products Fe 2 O 3 _PE, OrgPig_PP, and CNT_epoxy, although for Fe 2 O 3 _PE and CNT_epoxy at 1000 mg/kg dry matter soil inhibitory effects of 23% and 38%, respectively, were determined at test start.…”

Corrosion Resistance of Graphene oxide/Silver Coatings on Ni–Ti alloy and Expression of IL-6 and IL-8 in Human Oral Fibroblasts

“…Figure 6 shows the standard curve of the cell number, results of viability of the cells, and the cell morphology visualized in the light microscope after incubating for 24 hours in the conditioned medium of the bare NiTi, GO-coated NiTi, and GO/Ag-coated NiTi alloy. The cells were incubated for 24 hours assuming normally a material will release its maximum and active toxic products (if any) within 24 h and its toxicity decreases with time with decline in the concentration of the products 49,50 . In addition, the incubation period was kept 24 hours which was short enough to avoid reagent toxicity but long enough to provide adequate sensitivity 51 .…”