Thermal Conductivity of Amorphous Materials

Abstract

Thermal conductivity is one of the most fundamental properties of solid materials. The thermal conductivity of ideal crystal materials has been widely studied over the past hundreds years. On the contrary, for amorphous materials that have valuable applications in flexible electronics, wearable electrics, artificial intelligence chips, thermal protection, advanced detectors, thermoelectrics, and other fields, their thermal properties are relatively rarely reported. Moreover, recent research indicates that the thermal conductivity of amorphous materials is quite different from that of ideal crystal materials. In this article, the authors systematically review the fundamental physical aspects of thermal conductivity in amorphous materials. They discuss the method to distinguish the different heat carriers (propagons, diffusons, and locons) and the relative contribution from them to thermal conductivity. In addition, various influencing factors, such as size, temperature, and interfaces, are addressed, and a series of interesting anomalies are presented. Finally, the authors discuss a number of open problems on thermal conductivity of amorphous materials and a brief summary is provided.

Tailoring P-N Conversion in All-solid-state Polymer Composites with A Record Ionic Thermopower

“…The calculated thermal conductivities for PhNP-30, -50, -80 are around 0.1, 0.117 and 0.127 W m -1 K -1 , respectively, which matched well with experimental data (Fig. 1c) and were consistent with the thermal conductivity range (0.1~0.3 W m -1 K -1 ) of amorphous materials 36,37 . Besides, the increased thermal conductivity of PhNPs was ascribed to the enhanced heat transport contribution from electrostatic interactions between ions and the surrounding environment in the system with an increasing amount of NaTFSI/PC.…”

Remarkable Reduction of Interfacial Thermal Resistance in Nanophononic Heterostructures

“…[1][2][3] In the past decades, with the rapid progress in the manufacturing of nanoelectronic devices, heat dissipation has become one of the key issues for integration, thus heat conduction in nanoscale has garnered tremendous interest. [4][5][6][7][8][9][10][11] In addition to thermal management, [12] the study of heat conduction in nanoscale is also valuable for thermal barrier coating, thermal protection, [13][14][15] as well as thermoelectrics. [16] In the aforementioned physical phenomena and technological applications,…”

Significant enhancement of the thermoelectric properties of CaP3 through reducing the dimensionality

“…TE materials have attracted much attention because they can be used to directly convert waste heat into electrical energy (Seebeck effect) and vice versa (Peltier effect) [1][2][3] . Usually, the efficiency of TE energy generators is relatively low (< 10%) and it can be determined by the dimensionless figure of merit 4,5 ,…”