The importance of water temperature in denture cleaning procedures

Assessment of flexural strength and color alteration of heat-polymerized acrylic resins after simulated use of denture cleansers

“…The denture cleansers tested in this study were used according to the manufacturers' instructions and did not cause the whitening effect observed in some dentures soaked in chemical solutions. These findings are consistent with those of previous investigations, which attributed the whitening effect on chemically cleansed acrylic resin denture bases to the excessively high temperature of the water rather than to the denture cleanser itself (9)(10)(11)(12)14).…”

“…The findings of this study are consistent with those of previous investigations that pointed out that the correct use of chemical cleansers is not associated to alterations in mechanical properties of denture base materials (9)(10)(11)(12)14).…”

Assessment of flexural strength and color alteration of heat-polymerized acrylic resins after simulated use of denture cleansers

“…The denture cleansers tested in this study were used according to the manufacturers' instructions and did not cause the whitening effect observed in some dentures soaked in chemical solutions. These findings are consistent with those of previous investigations, which attributed the whitening effect on chemically cleansed acrylic resin denture bases to the excessively high temperature of the water rather than to the denture cleanser itself (9)(10)(11)(12)14).…”

“…The findings of this study are consistent with those of previous investigations that pointed out that the correct use of chemical cleansers is not associated to alterations in mechanical properties of denture base materials (9)(10)(11)(12)14).…”

The Effects of a Denture Cleanser on the Surface Roughness of Heat-Cured and Cold-Cured Acrylic Resins

“…31 The decontamination process of chemical agents may result in alterations of surface morphology and changes in flexural strength. [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32] Because the surface roughness value of the cold-cured acrylic resin decreased after immersion in the denture cleanser in this study, this phenomenon was supported.…”

Effect of Effervescent Denture Cleansers on 3D Surface Roughness of Conventional Heat Polymerized, Subtractively, and Additively Manufactured Denture Base Resins: An In Vitro Study

“…Studies have reported irreversible changes in the physical properties of DB resins when they are immersed in hot denture cleansing solutions. 21,33,34 In the current study, the effervescent solutions of Fittydent and Fixodent DCs were prepared using warm distilled water (40 • C), and specimens were immersed for 5 minutes as recommended by manufacturers. Surface roughness is an important physical characteristic for DB materials placed in the oral cavity.…”

“…The temperature of water used for immersing the DB in the cleansing solution is a critical factor. Studies have reported irreversible changes in the physical properties of DB resins when they are immersed in hot denture cleansing solutions 21,33,34 . In the current study, the effervescent solutions of Fittydent and Fixodent DCs were prepared using warm distilled water (40°C), and specimens were immersed for 5 minutes as recommended by manufacturers.…”

Assessment of flexural strength and color alteration of heat-polymerized acrylic resins after simulated use of denture cleansers

“…The denture cleansers tested in this study were used according to the manufacturers' instructions and did not cause the whitening effect observed in some dentures soaked in chemical solutions. These findings are consistent with those of previous investigations, which attributed the whitening effect on chemically cleansed acrylic resin denture bases to the excessively high temperature of the water rather than to the denture cleanser itself (9)(10)(11)(12)14).…”

“…The findings of this study are consistent with those of previous investigations that pointed out that the correct use of chemical cleansers is not associated to alterations in mechanical properties of denture base materials (9)(10)(11)(12)14).…”

The Effects of a Denture Cleanser on the Surface Roughness of Heat-Cured and Cold-Cured Acrylic Resins

“…31 The decontamination process of chemical agents may result in alterations of surface morphology and changes in flexural strength. [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32] Because the surface roughness value of the cold-cured acrylic resin decreased after immersion in the denture cleanser in this study, this phenomenon was supported.…”

Effect of Effervescent Denture Cleansers on 3D Surface Roughness of Conventional Heat Polymerized, Subtractively, and Additively Manufactured Denture Base Resins: An In Vitro Study

“…Studies have reported irreversible changes in the physical properties of DB resins when they are immersed in hot denture cleansing solutions. 21,33,34 In the current study, the effervescent solutions of Fittydent and Fixodent DCs were prepared using warm distilled water (40 • C), and specimens were immersed for 5 minutes as recommended by manufacturers. Surface roughness is an important physical characteristic for DB materials placed in the oral cavity.…”

“…The temperature of water used for immersing the DB in the cleansing solution is a critical factor. Studies have reported irreversible changes in the physical properties of DB resins when they are immersed in hot denture cleansing solutions 21,33,34 . In the current study, the effervescent solutions of Fittydent and Fixodent DCs were prepared using warm distilled water (40°C), and specimens were immersed for 5 minutes as recommended by manufacturers.…”

Assessment of flexural strength and color alteration of heat-polymerized acrylic resins after simulated use of denture cleansers

“…The denture cleansers tested in this study were used according to the manufacturers' instructions and did not cause the whitening effect observed in some dentures soaked in chemical solutions. These findings are consistent with those of previous investigations, which attributed the whitening effect on chemically cleansed acrylic resin denture bases to the excessively high temperature of the water rather than to the denture cleanser itself (9)(10)(11)(12)14).…”

“…The findings of this study are consistent with those of previous investigations that pointed out that the correct use of chemical cleansers is not associated to alterations in mechanical properties of denture base materials (9)(10)(11)(12)14).…”

The Effects of a Denture Cleanser on the Surface Roughness of Heat-Cured and Cold-Cured Acrylic Resins

“…31 The decontamination process of chemical agents may result in alterations of surface morphology and changes in flexural strength. [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32] Because the surface roughness value of the cold-cured acrylic resin decreased after immersion in the denture cleanser in this study, this phenomenon was supported.…”

Effect of Effervescent Denture Cleansers on 3D Surface Roughness of Conventional Heat Polymerized, Subtractively, and Additively Manufactured Denture Base Resins: An In Vitro Study

“…Studies have reported irreversible changes in the physical properties of DB resins when they are immersed in hot denture cleansing solutions. 21,33,34 In the current study, the effervescent solutions of Fittydent and Fixodent DCs were prepared using warm distilled water (40 • C), and specimens were immersed for 5 minutes as recommended by manufacturers. Surface roughness is an important physical characteristic for DB materials placed in the oral cavity.…”

“…The temperature of water used for immersing the DB in the cleansing solution is a critical factor. Studies have reported irreversible changes in the physical properties of DB resins when they are immersed in hot denture cleansing solutions 21,33,34 . In the current study, the effervescent solutions of Fittydent and Fixodent DCs were prepared using warm distilled water (40°C), and specimens were immersed for 5 minutes as recommended by manufacturers.…”