Tailoring thermal expansion of mechanically interlocked carbon fiber composite reinforced metal

Abstract

A method of controlling the thermal expansion of lightweight metals through the insightful incorporation of unidirectional carbon fiber reinforced polymer (CFRP) is demonstrated. The local and directional coefficients of linear thermal expansion (CLTE) of a carbon fiber composite reinforced aluminum (CFRP/Al) specimen can be controlled by tailoring the CFRP volume fraction and CFRP layup orientation, with a 36% reduction in CLTE achieved as compared to the baseline 7075 aluminum at a CFRP volume fraction of 0.26. When a unidirectional CFRP reinforcement is considered, the CLTE as predicted by the modulus modified rule of mixtures is within 1.3% of experimentally obtained values for CFRP volume fractions of 0.10, 0.16, and 0.26. Thermal digital image correlation (T-DIC) was performed to obtain local and directional CLTE values for the anisotropic CFRP/Al specimens which indicated CLTE is heterogeneous across the specimen length and width, which is otherwise undetected using standard quartz rod dilatometry to measure the CLTE of the macroscopic sample. Evidence for a minimum critical CFRP reinforcement length is also considered based upon the local thermal strain data collected by T-DIC. Using the mixed material approach presented here, it is possible to minimize or eliminate the thermal expansion mismatch effects that occur in mixed material structures, such as an automotive body structure (i.e., body in white).

Fully aminated rigid‐rod aromatic polyamide efficiently reinforces tetraglycidyl diamino diphenyl methane epoxy resin and its carbon fiber composite

“…The high‐performance CFRPs are commonly used in various fields such as industry, aerospace and automobile, etc 52,53 . Herein, TGDDM modified by fully aminated‐PPTA is further used in carbon fiber composite, aiming to break through the main limitations of CFRPs: interlaminar brittleness and poor interfacial adhesion 54,55 .…”

“…The high-performance CFRPs are commonly used in various fields such as industry, aerospace and automobile, etc. 52,53 Herein, TGDDM modified by fully aminated-PPTA is further used in carbon fiber composite, aiming to break through the main limitations of CFRPs: interlaminar brittleness and poor interfacial adhesion. 54,55 Figure 6 and Table 4 shows the flexural strength (σ f ) and modulus (E f ), total energy (E tot ), and interlaminar shear strength (ILSS) of fully aminated-PPTA/EP/CF.…”