Systematic Development of Highly Efficient and Clean Engines to Meet Future Commercial Vehicle Greenhouse Gas Regulations

Abstract

With increasing energy prices and concerns about the environmental impact of greenhouse gas (GHG) emissions, a growing number of national governments are putting emphasis on improving the energy efficiency of the equipment employed throughout their transportation systems. Within the U.S. transportation sector, energy use in commercial vehicles has been increasing at a faster rate than that of automobiles. A 23% increase in fuel consumption for the U.S. heavy duty truck segment is expected from 2009 to 2020. The heavy duty vehicle oil consumption is projected to grow while light duty vehicle (LDV) fuel consumption will eventually experience a decrease. By 2050, the oil consumption rate by LDVs is anticipated to decrease below 2009 levels due to CAFE standards and biofuel use. In contrast, the heavy duty oil consumption rate is anticipated to double. The increasing trend in oil consumption for heavy trucks is linked to the vitality, security, and growth of the U.S. and global economies.An essential part of a stable and vibrant U.S. economy is a productive U.S. trucking industry. Studies have shown that the U.S. gross domestic product (GDP) is strongly correlated to freight transport. As the economy grows, the freight tonnage increases as well as the annual vehicle miles traveled (VMT). Over 80% of all U.S. freight tonnage is transported by diesel power and over 75% is transported by trucks. The improved efficiency of heavy-duty engines and vehicles has been quickly overwhelmed by the increase in annual VMT. This results in heavy-duty vehicles consuming a growing share of the total transportation-related petroleum. Given the vital role that the trucking industry plays in the economy, improving the efficiency of diesel engines is a central focus of this paper.Trucks are the mainstay for trade, commerce, and economic growth. Sustaining a U.S. trucking industry that is competitive in global markets requires innovation. The truck manufacturing and supporting industries are faced with numerous challenges to reduce oil consumption and greenhouse gases, meet stringent emissions regulations, provide customer value, and improve safety. A key part of the strategy to meet these requirements is to improve the efficiency of the internal combustion engine (ICE) powering the trucks. The performance, low cost, and fuel flexibility render the ICE the leading candidate to power commercial vehicles for many decades.Historically, diesel engine technologies have taken more than 10 years after first introduced to diffuse throughout the commercial vehicle marketplace. This rate is faster when fuel economy provides a business advantage to the vehicle's owner. Increased efficiency and reduced emissions of diesel engines can be realized through technologies that improve engine design and better integrate systems. Engine manufacturers have a growing need to refine the capability to innovate, design, develop, and validate engine efficiency improvements. Therefore, the primary purpose of this paper is to provide guidelines and tools that allow ...

Reducing Diesel Engine Drive Cycle Fuel Consumption through Use of Cylinder Deactivation to Maintain Aftertreatment Component Temperature during Idle and Low Load Operating Conditions

“…Open cycle efficiency (OCE) captures the efficiency of the gas exchange process, closed cycle efficiency (CCE) represents the effectiveness of combustion and mechanical efficiency (ME) captures frictional and accessory losses (Stanton, 2013). The three efficiencies contribute to the brake thermal efficiency (BTE) as shown in equation (1) (for more information see Stanton et al (2013)).…”

Organic Rankine cycle – review and research directions in engine applications

“…1a). In the continued work, the ORC system was packaged on a truck employing low rates of EGR and high efficiency Selective Catalytic Reduction (SCR) system [11]. The system delivered 4.5-6% fuel efficiency improvements, the turbine output power was mechanical to the crankshaft through a gearbox and the condenser was a direct air cooled condenser at the front of the engine cooling module.…”

“…Experimental results with efficiencies approaching 80% with scroll expander by Wang et al [8], 70% with screw expander by Zhang et al [9] and 65% with piston expander by Seher et al [10] have been presented. Furthermore, the trucking sector is integrating prototypes to address issues relating to durability, packaging and controls [11]. ORCs were the most demonstrated technology in the 5-15 kW range, offering thermal efficiencies around 8-12% and a potential of 4-6% reduction in fuel consumption.…”

An innovative Organic Rankine Cycle system for integrated cooling and heat recovery

“…waste heat recovery) and use of 38 alternative fuels (e.g. biodiesel) [2,3]. The HDDE is expected to remain the prime mover of choice for long-haul trucks…”

“…The selected engine 97 platform utilised a high efficiency Selective Catalytic Reduction (SCR) system as the only means to meet the Euro 6 98 oxides of nitrogen level. With a steadily increasing SCR efficiency, it is expected that exhaust gas recirculation may be 99 phased-out by the end of the decade [3]. This will additionally offer marginal improvements in the base engine 100 efficiency, and reduction in carbon deposits and engine wear [22,23].…”