Synthesis of photocrosslinkable hydrogels for engineering three-dimensional vascular-like constructs by surface tension-driven assembly

et al. 2022

IJN

Self Cite

Purpose Methacrylic anhydride-modified gelatin (GelMA) hydrogels exhibit many beneficial biological features and are widely studied for bone tissue regeneration. However, deficiencies in the mechanical strength, osteogenic factors and mineral ions limit their application in bone defect regeneration. Incorporation of inorganic fillers into GelMA to improve its mechanical properties and bone regenerative ability has been one of the research hotspots. Methods In this work, hydroxyapatite nanofibers (HANFs) were prepared and mineralized in a simulated body fluid to make their components and structure more similar to those of natural bone apatite, and then different amounts of mineralized HANFs (m-HANFs) were incorporated into the GelMA hydrogel to form m-HANFs/GelMA composite hydrogels. The physicochemical properties, biocompatibility and bone regenerative ability of m-HANFs/GelMA were determined in vitro and in vivo. Results The results indicated that m-HANFs with high aspect ratio presented rough and porous surfaces coated with bone-like apatite crystals. The incorporation of biomimetic m-HANFs improved the biocompatibility, mechanical, swelling, degradation and bone regenerative performances of GelMA. However, the improvement in the performance of the composite hydrogel did not continuously increase as the amount of added m-HANFs increased, and the 15m-HANFs/GelMA group exhibited the best swelling and degradation performances and the best bone repair effect in vivo among all the groups. Conclusion The biomimetic m-HANFs/GelMA composite hydrogel can provide a novel option for bone tissue engineering in the future; however, it needs further investigations to optimize the proportions of m-HANFs and GelMA for improving the bone repair effect.

Section: Methodsmentioning

confidence: 99%

Biomimetic Mineralized Hydroxyapatite Nanofiber-Incorporated Methacrylated Gelatin Hydrogel with Improved Mechanical and Osteoinductive Performances for Bone Regeneration

et al. 2022

IJN

Self Cite

“…In recent years, various methods of designing anisotropic hydrogels have been reported, including freezing casting, , mechanical stretching, ,− ion diffusion, , and field auxiliary assembly. , Among them, mechanical stretching has been widely used to construct anisotropic hydrogels due to the simple processing technology. For example, Lin et al proposed a method of preparing anisotropic hydrogels with high mechanical strength, which was under prestretching conditions using the directional chelation of carboxyl anions and Fe 3+ .…”

Section: Introductionmentioning

confidence: 99%

Muscle-Inspired Anisotropic Hydrogel Strain Sensors

Zhang

ACS Appl. Mater. Interfaces

et al. 2021

Hydrogel strain sensors have attracted tremendous attention in medical monitoring, flexible wearable devices, and human–machine interfaces. However, traditional hydrogels exhibit isotropic sensing performance based on their isotropic structure. Therefore, it is challenging to fabricate a hydrogel with an anisotropic structure similar to human tissues for achieving anisotropic sensing characteristics. Herein, we proposed a simple and effective method for preparing anisotropic poly(vinyl alcohol) (PVA) conductive hydrogels, which demonstrated anisotropic mechanical properties and anisotropic ion conductivity. The anisotropic hydrogel was successfully constructed through first thermal stretching and then directional freezing. The mechanical strength of hydrogels along the parallel stretching direction (stress of 1596 kPa and toughness of 3.69 MJ/m3) was higher than that of the hydrogels along the vertical stretching direction (stress of 883.1 kPa and toughness of 1.96 MJ/m3). Moreover, the hydrogel showed anisotropic conductivity on the advantage of the different ion channels. The prepared hydrogel sensor exhibited anisotropic sensing for multidirectional stress in the strain range from 0.5 to 100%. The gauge factors (GF) parallel to the stretching direction were greater than the GF vertical to the stretching direction. The anisotropic hydrogel sensors are expected to have broad application prospects in flexible wearable devices and medical monitoring.

“…GelMA was prepared according to our previous report [33]. Briefly, 10 g of type A gelatin from pig skin was dissolved in 100 ml of PBS at 50 • C, and stirred until completely dissolved.…”

Section: Preparation Of Agbr@sio 2 /Gelma Composite Hydrogelsmentioning

confidence: 99%

Preparation and antibacterial properties of an AgBr@SiO₂/GelMA composite hydrogel

Yang

et al. 2022

Biomed. Mater.

Self Cite

Pure gelatin hydrogels lack antibacterial function and have poor mechanical properties, which restrict their application in wound dressings. In this study, nanosized silver bromide-doped mesoporous silica (AgBr@SiO2) microspheres with hollow structures were prepared by a modified Stober method. The novel microspheres can not only release silver ions to treat bacteria but also release drugs to treat skin wound. Furthermore, AgBr@SiO2 microspheres were modified with propyl methacrylate, incorporated into methacrylated gelatin (GelMA), and crosslinked by UV light to prepare AgBr@SiO2/GelMA dressings consisting of composite hydrogels. The results showed that the AgBr@SiO2 microspheres could enhance the mechanical properties of the hydrogels. With the increase in the AgBr@SiO2 concentration from 0.5 to 1 mg/mL, the dressings demonstrated effective antimicrobial activity against both Staphylococcus aureus and Escherichia coli. Furthermore, full-thickness skin wounds in vivo wound healing studies with Sprague–Dawley rats were evaluated. When treated with AgBr@SiO2/GelMA containing 1 mg/mL AgBr@SiO2, only 15% of the wound area left on day 10. Histology results also showed the epidermal and dermal layers were better organized. These results suggest that AgBr@SiO2/GelMA-based dressing materials could be promising candidates for wound dressings.