Study on the suitability of bamboo fiber for manufacturing insulating presspaper

Huang, Jianwen; Zhang, Ling; Zhou, Yi; Huang, Meng; Sha, Ye

doi:10.1109/tdei.2016.005679

Cited by 13 publications

(6 citation statements)

References 20 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…This is partly due to the similar chemical functional groups and crystallinity indexes of reference presspaper and NFC modified presspaper [26], see Figure 5 and Figure 6. Residue of tested samples is about 14%.…”

Section: Thermal Properitesmentioning

confidence: 75%

“…All the three samples exhibit a very similar thermal endurance. For a given weight loss, the difference in temperature is less than 5 • C. This is partly due to the similar chemical functional groups and crystallinity indexes of reference presspaper and NFC modified presspaper [26], see Figures 5 and 6. Residue of tested samples is about 14%.…”

Section: Thermal Properitesmentioning

confidence: 96%

“…A Keithley 6517A electrometer (Keithley, Cleveland, OH, USA) was adopted to supply DC voltage and detect the corresponding polarization current. Detailed diagram of the setup could be found in Huang et al [26]. The measurements were conducted at room temperature.…”

Section: Volume Resistivity and Dielectric Responsementioning

confidence: 99%

“…Young's modulus of presspaper is determined by the Young's modulus of component fiber and the efficiency of stress transfer between different fibers. Long fibers and large relative bonded areas are beneficial for the stress transfer [26]. As shown in Figure 4, NFC can contribute to the bonding of neighboring fibers.…”

Section: Mechanical Strengthmentioning

confidence: 99%

See 3 more Smart Citations

Enhancing Insulating Performances of Presspaper by Introduction of Nanofibrillated Cellulose

et al. 2017

Self Cite

View full text Add to dashboard Cite

This study explores the possibility of enhancing both mechanical and breakdown properties of insulating presspaper by the introduction of an organic nano additive. Four different concentrations of nanofibrillated cellulose (NFC) were taken into account: 0.5 wt %, 2.5 wt %, 5 wt %, and 10 wt %. Presspaper containing no NFC was also prepared as a reference. Obtained samples were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Mechanical properties and breakdown behaviors were measured. Results show that the addition of 10 wt % NFC to softwood fibers can achieve the best performance. Tensile strength of reference presspaper is 109 MPa, whereas that of presspaper modified by 10 wt % NFC is 136 MPa, resulting in a 25% increase. The improved tensile strength can be attributed to the increased density and inter fiber bond strength. More importantly, presspaper reinforced by 10 wt % NFC can also achieve enhanced AC and DC breakdown strengths, which are 19% and 21% higher than those of the reference presspaper. It is concluded that NFC is likely to be a promising nano additive for cellulose insulation.

show abstract

Section: Thermal Properitesmentioning

confidence: 75%

Section: Thermal Properitesmentioning

confidence: 96%

Section: Volume Resistivity and Dielectric Responsementioning

confidence: 99%

Section: Mechanical Strengthmentioning

confidence: 99%

See 2 more Smart Citations

Enhancing Insulating Performances of Presspaper by Introduction of Nanofibrillated Cellulose

et al. 2017

Self Cite

View full text Add to dashboard Cite

show abstract

“…At the moment, the inventions of using bamboo in daily life are reaching out to abundant of manufacturing applications. Due to many potential researchers advance in handling new innovation, so there are a variety of new discoveries in the uses of bamboos such as in paper technology [6], chemical industry [7] and robotic arena [8]. These inventions are good since it can give new ideas and replace the conventional method of each field.…”

Section: Introductionmentioning

confidence: 99%

High Voltage Durability of Bambusa Vulgaris as a Bio-composite Material

Zain¹,

Ali²,

Hussin³

2018

IJECE

View full text Add to dashboard Cite

This study is conducted in order to measure and identify the ability of a bio-composite material to the high voltage. According to it, the developed bio-composite material is tested to ensure the maximum voltage that the material can hold. The bio-composite material which made from a mixture of Bambusa Vulgaris and a selected polymer named as High Density Polyethylene (HDPE). The Bambusa Vulgarisis going through several processes before mixed together with HDPE using wood plastic composite (WPC) technique which also consists of several stages. There are several samples of bio-composite substance are fabricated. The difference among them is the composition of the raw materials (Bambusa Vulgaris and HDPE) used. In this research, the high voltage measurement which also called as breakdown voltage measurement of the bio-composite material is examined by using appropriate experiments. All the experimental results are presented and discussed in this paper.

show abstract

Effect of balloon-like structure on properties of bamboo pulp during beating process

Dong¹,

Lei²,

Hou³

et al. 2023

Cellulose

View full text Add to dashboard Cite

Study on the suitability of bamboo fiber for manufacturing insulating presspaper

Cited by 13 publications

References 20 publications

Enhancing Insulating Performances of Presspaper by Introduction of Nanofibrillated Cellulose

Enhancing Insulating Performances of Presspaper by Introduction of Nanofibrillated Cellulose

High Voltage Durability of Bambusa Vulgaris as a Bio-composite Material

Effect of balloon-like structure on properties of bamboo pulp during beating process

Contact Info

Product

Resources

About