2022
DOI: 10.1007/978-981-16-9057-0_57
|View full text |Cite
|
Sign up to set email alerts
|

Study of Electrical Behaviors of PVDF/BiGdO3 Polymer Composite

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
1
1
1

Citation Types

0
3
0

Year Published

2023
2023
2024
2024

Publication Types

Select...
2

Relationship

0
2

Authors

Journals

citations
Cited by 2 publications
(3 citation statements)
references
References 16 publications
0
3
0
Order By: Relevance
“…The lower tan δ of PVDF–BF33BT below 10 4 Hz is due to the comparatively minimal tan δ of the BF33BT, as shown in Figure S4 of the SI, and the increase of tan δ above 10 4 Hz is attributed to the higher rate of α-relaxation in the composites than the pure PVDF . The rapid decrease in tan δ in the frequency range 10 2 –10 4 Hz is due to the Maxwell–Wagner relaxation, which is sluggish in the PVDF–BF33BT composites. , The ε′ of the two-phase composite improves from 13 to 19.3, and the tan δ decreases from 0.096 to 0.042 (1 kHz) for the 40 wt % BF33BT concentration as shown in Figure e. The dielectric constant enhancement and the tan δ decrement make the two-phase PVDF–BF33BT composite preferable for piezoelectric applications; however, the addition of GO further improves the overall electrical properties of the composite.…”
Section: Resultsmentioning
confidence: 95%
See 1 more Smart Citation
“…The lower tan δ of PVDF–BF33BT below 10 4 Hz is due to the comparatively minimal tan δ of the BF33BT, as shown in Figure S4 of the SI, and the increase of tan δ above 10 4 Hz is attributed to the higher rate of α-relaxation in the composites than the pure PVDF . The rapid decrease in tan δ in the frequency range 10 2 –10 4 Hz is due to the Maxwell–Wagner relaxation, which is sluggish in the PVDF–BF33BT composites. , The ε′ of the two-phase composite improves from 13 to 19.3, and the tan δ decreases from 0.096 to 0.042 (1 kHz) for the 40 wt % BF33BT concentration as shown in Figure e. The dielectric constant enhancement and the tan δ decrement make the two-phase PVDF–BF33BT composite preferable for piezoelectric applications; however, the addition of GO further improves the overall electrical properties of the composite.…”
Section: Resultsmentioning
confidence: 95%
“…22 The rapid decrease in tan δ in the frequency range 10 2 −10 4 Hz is due to the Maxwell−Wagner relaxation, which is sluggish in the PVDF−BF33BT composites. 53,54 The ε′ of the two-phase composite improves from 13 to 19.3, and the tan δ decreases from 0.096 to 0.042 (1 kHz) for the 40 wt % BF33BT concentration as shown in Figure 4e. The dielectric constant enhancement and the tan δ decrement make the two-phase PVDF−BF33BT composite preferable for piezoelectric applications; however, the addition of GO further improves the overall electrical properties of the composite.…”
Section: Structural and Morphological Xrd Ftir Andmentioning
confidence: 82%
“…The changes observed in the low-and high-frequency regions can be attributed to the Maxwell−Wagner−Sillars polarization phenomenon. 51,52 The incorporation of nucleating agents into the nanocomposite produced a positive trend in the dielectric constant. A remarkable change in dielectric constant is observed for the PML-2 sample compared to the PML-0 mat.…”
Section: Dielectric Studiesmentioning
confidence: 99%