Structural Characteristics and Graphitizability of Tars from Thermal versus Microwave Plasma Pyrolysis of Coals

Abstract

This work investigates the structural characteristics and graphitizability of tars obtained from thermal pyrolysis versus the reactive microwave (MW) plasma pyrolysis of coals. Powder River Basin (PRB) coal tars obtained by thermal pyrolysis have been compared with tars obtained from MW plasma pyrolysis containing H 2 . To study the effect of coal rank and MW plasma environment, the PRB tars have been compared with Middle Kittanning (MK) coal tars obtained from an argon−hydrogen MW plasma (hp) and an argon-CO 2 MW plasma (cdp) environment. Fourier transform infrared spectroscopy has been used for investigating the structural differences among the tar samples. The tars have been graphitized (GR-) at 2500 °C and the graphitic quality assessment has been performed using X-ray diffraction and transmission electron microscopy. MW plasma-derived tars have higher aromaticity, lower condensation, and lower oxygenated molecules compared to thermally derived tars. These advantageous features of MW plasma-derived tars lead to the formation of crystallites several times larger than thermally derived tars after graphitization. When considering coal of the same rank (bituminous), the choice of the MW plasma environment has a substantial impact on the graphitic quality of the tars. The utilization of MW plasma containing H 2 leads to a significant increase in both the crystallite diameter (by 60%) and stacking height (by 40%) compared to MW plasma containing CO 2 . Furthermore, within the same MW plasma environment, the coal rank plays a significant role in determining the crystallite diameter and stacking height of the GR-tars. In particular, GR-MK tar obtained from hp exhibits a 135% larger crystallite diameter and 85% larger stacking height compared with GR-PRB tar obtained from hp. These findings demonstrate the potential to tailor the composition of coal-derived tars and consequently influence their graphitizability by adjusting the reactive environment during MW plasma treatment.