Spectroscopic studies of the ionic liquid during the electrodeposition of Al–Ti alloy in 1-ethyl-3-methylimidazolium chloride melt

Preparation of Nanocellulose Using Ionic Liquids: 1-Propyl-3-Methylimidazolium Chloride and 1-Ethyl-3-Methylimidazolium Chloride

“…In the spectra, there are bands of ring stretching symmetries that occur at 1562 cm −1 (N=C) and 1450 cm −1 (CH 2 (N), CH 3 (N)CN). Moreover, there are observed peaks at 1085 cm −1 , which could arise due to the N-C bond, and at 692 cm −1 , which could be attributed to the C-H bond [40,41].…”

Ternary alloying additions and multilayering as strategies to enhance the galvanic protection ability of Al-Zn coatings electrodeposited from ionic liquid solution

“…One promising alternative approach to electrodeposition of aluminum-zinc multilayers is through use of room temperature ionic liquids. In particular, ionic liquids consisting of a mixture of AlCl 3 and 1-ethyl-3-methylimidazolium chloride (EMIC) have been successfully used to electrodeposit pure aluminum [10][11][12][13][14] as well as a wide range of aluminum alloys, including Al-Zn [15,16], Al-Mn [17][18][19][20][21][22][23][24], Al-Zr [25], and many others [26][27][28][29][30][31][32][33][34][35][36][37]. In Al-Mn, there is even prior work reporting multilayered coatings, in which the composition and microstructure were controlled between layers through modulation of deposition current density [23,24].…”

Unexplored Class of Eutectic Electrolytes for Rechargeable Magnesium Batteries

“…FTIR of EMIC displays the typical aromatic and aliphatic C–H stretching bands at ∼3096 and 2986 cm –1 , respectively. Peaks corresponding to the imidazolium symmetric ring stretch are observed at 1170, 1337, 1460, and 1572 cm –1 . Peaks at 1390 and 1337 cm –1 correspond to the C–H out-of-plane bending modes while in-plane bending mode vibrations are detected at 961 cm –1 .…”