Shape Actuation via Internal Stress-Induced Crystallization of Dual-Cure Networks

Abstract

We demonstrate a single-phase, two-way shape actuator that, in the absence of an external load, elongates upon cooling and reversibly contracts upon heating. In a simple and straightforward process, a partially cross-linked, semicrystalline poly­(ε-caprolactone) (PCL) network is melted, stretched to several hundred percent strain, and further cross-linked. Upon removal of the applied load, the elastic double network adopts a “state-of-ease” that retains part of its former strain. When cooled, internal stress-induced crystallization causes further elongation of configurationally biased chains. When heated, crystallites melt, and the sample returns to its equilibrium state-of-ease. Under optimized conditions, reversible actuation >15% strain can be reproducibly achieved, and samples can be cycled multiple times with highly uniform actuation with no observable creep. The mechanism behind such actuation was further confirmed via calorimetry and X-ray scattering.

Body temperature triggered shape‐memory polymers with high elastic energy storage capacity

“…(b)], confirming the explanation. This phenomenon was also well understood through small‐angle X‐ray scattering (SAXS) in a few previous reports …”

Well-Defined Shape-Memory Networks with High Elastic Energy Capacity

“…15 Strain-induced crystallization of PCL has enabled two-way shape memory 18 and recently stress-free shape actuation. 19 The role of network architecture on strain-induced crystallization and on the performance of cold-drawn shapememory polymers remains unclear. It is well-known that network characteristics such as the molecular weight distribution between cross-links, cross-link functionality and spatial distribution, and the presence of dangling chains and primary loops have large effects on elastomeric properties.…”

Synthesis and properties of click coupled graphene oxide sheets with three‐dimensional macromolecules

“…Shape‐memory materials are a class of smart materials that respond to external stimuli, typically temperature and their applications have expanded steadily as well as academic and industry. Shape‐memory polymers (SMP) have received more attention owing to their low cost, low density, easy processability compared with shape‐memory alloys, ceramics, hydrogels, etc . However, SMPs suffer from relatively weak recovery force due to their low stiffness when compared with most other shape memory alloys.…”