Resistive switching modulation by incorporating thermally enhanced layer in HfO₂-based memristor

Abstract

Oxide-based memristors by incorporating thermally enhanced layer (TEL) have showed great potential in electronic devices for high-efficient and high-density neuromorphic computing owing to the improvement of multilevel resistive switching. However, research on the mechanism of resistive switching regulation is still lacking. In this work, based on the method of finite element numerical simulation analysis, a bilayer oxide-based memristor Pt/HfO2 (5 nm)/Ta2O5 (5 nm)/Pt with the Ta2O5 TEL was proposed. The oxygen vacancy concentrates distribution shows that the fracture of conductive filaments (CF) is at the interface where the local temperature is the highest during the reset process. The multilevel resistive switching properties were also obtained by applying different stop voltages. The fracture gap of CF can be enlarged with the increase of the stopping voltage, which is attributed to the heat-gathering ability of the TEL. Moreover, it was found that the fracture position of oxygen CF is dependent on the thickness of TEL, which exhibits a modulation of device RS performance. These results provide a theoretical guidance on the suitability of memristor devices for use in high-density memory and brain-actuated computer systems.