Representation of a Monotone Curve by a Contour with Regular Change in Curvature

Abstract

The problem of modelling a smooth contour with a regular change in curvature representing a monotone curve with specified accuracy is solved in this article. The contour was formed within the area of the possible location of a convex curve, which can interpolate a point series. The assumption that if a sequence of points can be interpolated by a monotone curve, then the reference curve on which these points have been assigned is monotone, provides the opportunity to implement the proposed approach to estimate the interpolation error of a point series of arbitrary configuration. The proposed methods for forming a convex regular contour by arcs of ellipses and B-spline ensure the interpolation of any point series in parts that can be interpolated by a monotone curve. At the same time, the deflection of the contour from the boundaries of the area of the possible location of the monotone curve can be controlled. The possibilities of the developed methods are tested while solving problems of the interpolation of a point series belonging to monotone curves. The problems are solved in the CAD system of SolidWorks with the use of software application created based on the methods developed in the research work.

Solution of Positional Problems at Modeling of Monotonous Curves

“…При формуванні поверхонь за заданими умовами такими характеристиками можуть бути: відсутність осциляції, заданий порядок гладкості, динаміка зміни положень дотичних і значень радіусів кривини вздовж кривих і т.д. [7][8]. Якщо поверхня задана сітчастим каркасом, виникає необхідність узгодження характеристик кривих, що належать різним сімействам.…”

Right-Censored Time Series Modeling by Modified Semi-Parametric A-Spline Estimator

“…Note also that the BS curve can be uniquely represented as a linear combination of the BSs basis functions in Equation (9), as given in the next section. Note that references [ 23 , 24 ] could be counted as recent studies about BSs.…”

The Influence of Wave Processes of Hydraulic Oils on the Operation of a Hydraulic Drive

“…Due to the development of technologies for growing crops, agricultural machinery manufacturers are faced with the issue of providing new technologies with appropriate machines and units with improved technical characteristics (Karaiev et al, 2021;Havrylenko et al, 2021a;Havrylenko et al, 2021b;Khasawneh et al, 2021;Mannheim and Simenfalvi, 2020).…”