Q-Band Millimeter Wave Imaging in the Far-Field Enabled by Optical Upconversion Methodology

Abstract

Millimeter-wave (mmW) imaging has evolved to the point where it offers distinctive remote sensing capabilities in many application scenarios, such as port and harbor security, search and rescue, and navigational aids, due to its unique ability to penetrate atmospheric obscurants. Some of the applications being considered require passive imaging, imposing challenging sensitivity requirements to detect the low power levels in this spectral region. One metric used in this regard is the noise equivalent power (NEP), which quantifies the sensitivity of a detector. By utilizing a unique detector technology based on optical upconversion a low NEP value is achieved as compared to other RF methods, without the use of cryogenic cooling or low noise amplification. In addition, the overall size and weight may be reduced as compared to other imaging methodologies. As such, the construction and development of a passive mmW imaging system utilizing optical upconversion was undertaken, operating in the Q-Band to collect radiation between 33 and 50 GHz. Herein, we describe the passive mmW imager architecture and operation. Also presented are imaging results obtained using this approach as well as key imager metrics that have been experimentally validated.

Terahertz Thermal Sensing by Using a Defect-Containing Periodically Corrugated Gold Waveguide

“…This is due to the small value of the expansion coefficient, α. The temperature-dependent plasma frequency, ω p (T), can therefore be calculated by using Equation (9).…”

“…Secondly, the wide spectral range of the THz waves can be used to characterize the composition of matter [6,7]. Thirdly, the THz waves are highly penetrating for many substances, providing a different and more efficient solution for search and rescue [8,9]. Based on these advantages of the THz waves, an increasing number of scientific publications can be found in the field of THz technology.…”

Characteristic analysis of aspheric quasi-optical lens antenna in millimeter-wave radiometer imaging system

“…Imaging systems have been developed in the millimeter-wave (MMW) region because of, in contrast to a visible imager and infrared, their ability to see through bad weather for surveillance and to penetrate opaque objects such as clothing, polymers, and some building materials for security applications [1][2][3][4]. There are two optimum frequency bands for the use in MMW imaging, Q-band (35 GHz band) and W-band (94 GHz band).…”