“…Therefore, the analysis substantiates the carbonitride, rather than nitride, nature of the material. The appearance of a small peak related to the oxygen seems to be due to the surface contamination (see EELS analysis) and is almost always observed in similar cases 4, 7, 17, 18 . The percentages of B, C, and N in the B x C y N z nanomaterial were calculated from survey scan spectrum to be approximately 39%, 12%, and 42%, respectively, implying the chemical formula of BC 0.3 N 1.08 .…”
Section: Resultsmentioning
confidence: 80%
“…Nanoscale BCN has been synthesized in various nanostructured forms such as nanowires 5 , nanofibers 6 , nanosheets 7 – 10 , nanotubes 11 – 17 , spherical nanocages 2 , hollow spheres 18 , mesoporous 19 , and amorphous 20 , 21 structures. To synthesize these various BCN nanostructures, several methods have been employed depending on the desired morphology of the product.…”
The ternary compound boron carbonitride (BCN) was synthesized in the form of few-layer nanosheets through a mechanically induced self-sustaining reaction (MSR). Magnesium was used to reduce boron trioxide in the presence of melamine in a combustive manner. The process to form the nanostructured material was very rapid (less than 40 min). The prepared powder was investigated by various techniques such as X-ray diffraction (XRD), Fourier Transform infrared (FTIR), Micro-Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HRTEM), and electron energy loss spectroscopy (EELS). The thermal stability and the optical behavior of the BCN nanosheets were also studied by thermal analysis and UV-vis spectroscopy, respectively. The formation mechanism of the nanosheet morphology was described in detail.
“…Therefore, the analysis substantiates the carbonitride, rather than nitride, nature of the material. The appearance of a small peak related to the oxygen seems to be due to the surface contamination (see EELS analysis) and is almost always observed in similar cases 4, 7, 17, 18 . The percentages of B, C, and N in the B x C y N z nanomaterial were calculated from survey scan spectrum to be approximately 39%, 12%, and 42%, respectively, implying the chemical formula of BC 0.3 N 1.08 .…”
Section: Resultsmentioning
confidence: 80%
“…Nanoscale BCN has been synthesized in various nanostructured forms such as nanowires 5 , nanofibers 6 , nanosheets 7 – 10 , nanotubes 11 – 17 , spherical nanocages 2 , hollow spheres 18 , mesoporous 19 , and amorphous 20 , 21 structures. To synthesize these various BCN nanostructures, several methods have been employed depending on the desired morphology of the product.…”
The ternary compound boron carbonitride (BCN) was synthesized in the form of few-layer nanosheets through a mechanically induced self-sustaining reaction (MSR). Magnesium was used to reduce boron trioxide in the presence of melamine in a combustive manner. The process to form the nanostructured material was very rapid (less than 40 min). The prepared powder was investigated by various techniques such as X-ray diffraction (XRD), Fourier Transform infrared (FTIR), Micro-Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HRTEM), and electron energy loss spectroscopy (EELS). The thermal stability and the optical behavior of the BCN nanosheets were also studied by thermal analysis and UV-vis spectroscopy, respectively. The formation mechanism of the nanosheet morphology was described in detail.
“…[13,[19][20][21][22][23][24][25] Polymer-precursor-based synthesis of BCN has been reportedb yZ hang et al,a lthough there are af ew concerns such as inadequate purity and dimensional homogeneity. [26] In contrast to these methods, the presentw ork reports af acile synthesis of BCN NSs by employingb oric acid, urea and glucosea sB ,Nand Cs ources, respectively,a sh igh-performance supercapacitor electrode materials.…”
Two-dimensional hexagonal boron carbon nitride (BCN) nanosheets (NSs) were synthesized by new approach in which a mixture of glucose and an adduct of boric acid (H3 BO3 ) and urea (NH2 CONH2 ) is heated at 900 °C. The method is green, scalable and gives a high yield of BCN NSs with average size of about 1 μm and thickness of about 13 nm. Structural characterization of the as-synthesized material was carried out by several techniques, and its energy-storage properties were evaluated electrochemically. The material showed excellent capacitive behaviour with a specific capacitance as high as 244 F g(-1) at a current density of 1 A g(-1) . The material retains up to 96 % of its initial capacity after 3000 cycles at a current density of 5 A g(-1) .
“…11,35 The sp2-bonded B=N and C=N bonds are known to emit photoelectrons that bonded to the core state of N at 398.0-398.3 eV and 399-400 eV, respectively. [33][34][35] The content of pyridine-like N in the sample at 850 • C is highest among the four samples. Similarly, the C1s spectrum in figure 3(c) has three peaks with a broad shoulder.…”
Section: Resultsmentioning
confidence: 93%
“…The chemical states of B, C, and N elements were investigated using X-ray photoelectron spectroscopy figure 3(b), the spectrum is mainly composed of two peaks through Gaussian fitting. The peak of N1s with binding energies of 398.2 eV can be assigned to the N atoms in pyridine-like N-C structures; [33][34][35] the peak of N1s with binding energies of 399.0 eV can be assigned to the N atoms bonded to C atoms as graphite-like structures. 11,35 The sp2-bonded B=N and C=N bonds are known to emit photoelectrons that bonded to the core state of N at 398.0-398.3 eV and 399-400 eV, respectively.…”
Multiwalled carbon nanotubes doped with boron and nitrogen (BCNTs) have been synthesized by chemical vapour deposition at temperatures ranging from 800 • C to 950 • C. Their morphological and structural features have been studied by transmission electron microscope, which reveal that BCNTs have bamboo-like structure. The results of X-ray photoelectron spectroscopy demonstrated that the atomic ratio of B, C and N of BCNTs is about 1:4:1, when temperature is 850 • C. Electrooxidation performance of the BCNTs for NO at the modified electrodes was investigated. The results of cyclic voltammograms and the electrochemical impedance spectroscopy of BCNT-modified electrodes indicated that the activity of NO electrooxidation on 850 • C-modified electrodes is much stronger than others and the charge transfer resistance of NO electroxidation BCNT-modified electrode is the least. By this means, BCNT-modified electrodes showed excellent electrode materials for NO detection and other potential applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.